WK2 NUDGE BAR

by: Chief Products

Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.

  • Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.

    FEATURES
    304 Stainless Steel (Excellent Corrosion & Scratch Resistance)
    Bar = Mirror Polished or Durable Powder Coat Finish
    Mounting Arms = E-Coat + Durable Powder Coat Finish
    Easy Installation (Difficulty = 2/10)
    SPECIFICATIONS
    10.6kg Fully Installed Weight (Including Mounting Hardware)
    63.5mm Bar Diameter
    629mm Mounting Tab Total Length (24.76 inches)
    599mm Mounting Tab Slot Length (23.58 inches)
    123 Brinell Hardness (Excellent Scratch Resistance)
    29.4˚ Approach Angle (lower front fascia removed + standard suspension)
    33.3˚ Approach Angle (lower front fascia removed + air suspension OR2)
    Same As Stock Approach Angle (lower front fascia installed)
    INCLUDES
    GLOSS BLACK
    1 Gloss Black Bar (304 Stainless Steel)
    2 Chassis Mounting Arms
    4 Chassis Mounting Plates
    2 M10 x 60mm Heavy Duty Washers (Black EDP Coating)
    4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
    4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated)
    8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
    2 M10 Nuts (Zinc Plated)
    1 4g pouch Anti-Seize
    1 Installation Instructions
    MIRROR POLISHED
    1 Mirror Polished Bar (304 Stainless Steel)
    2 Chassis Mounting Arms
    4 Chassis Mounting Plates
    2 M10 x 60mm Heavy Duty Washers (Black EDP Coating)
    4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
    4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated)
    8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
    2 M10 Nuts (Zinc Plated)
    1 4g pouch Anti-Seize
    1 Installation Instructions
    [MOUNTING ARMS ONLY]
    2 Chassis Mounting Arms
    4 Chassis Mounting Plates
    2 M10 x 60mm Heavy Duty Washers (Black EDP Coating)
    4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
    4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated)
    8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
    2 M10 Nuts (Zinc Plated)
    1 4g pouch Anti-Seize
    1 Installation Instructions
    OPTIONS
    GLOSS BLACK
    Gloss Black Stainless Steel (304) Bar with Mounting Arms and all required mounting hardware.
    MIRROR POLISHED
    Mirror Polished 304 Stainless Steel Bar with Mounting Arms and all required mounting hardware.
    [MOUNTING ARMS ONLY]
    Mounting Arms sold as a separate kit (no bar included).
    MORE INFO
    *Parking Sensor Compatibility - We provide 95% compatibility (read more).
  • Excellent Approach Angle
    Since our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.

    Parking Sensor Compatibility
    Through careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on all WK2 models.

    High Strength
    Our innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.

    Highly Scratch Resistant
    By using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.

    Low Installed Weight
    Only 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

    Accommodates Numerous Lighting & Accessory Options
    The accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.

    Contoured To Fit
    The accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.

    Compatible With Front Recovery Points
    Can be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.

    Compatible With Adaptive Cruise Control
    Through careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.

    Guards Against Damage During Recovery
    The mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.

    Easy To Install
    We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.

    Industry Leading Corrosion Protection
    We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.

    Mirror Polish That Lasts
    Our mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.

    Top Quality Finishing Touches
    We include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  • Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for the Mounting Brackets, (see notes below).
    WK2 Nudge Bar fits the following vehicles:
    2011 Jeep Grand Cherokee - All Models & Limited Editions
    2012 Jeep Grand Cherokee - All Models & Limited Editions
    2013 Jeep Grand Cherokee - All Models & Limited Editions
    2014 Jeep Grand Cherokee - All Models & Limited Editions
    2015 Jeep Grand Cherokee - All Models & Limited Editions
    2016 Jeep Grand Cherokee - All Models & Limited Editions
    2017 Jeep Grand Cherokee - All Models & Limited Editions
    2018 Jeep Grand Cherokee - All Models & Limited Editions
    2019 Jeep Grand Cherokee - All Models & Limited Editions
    2020 Jeep Grand Cherokee - All Models & Limited Editions
    2021 Jeep Grand Cherokee - All Models & Limited Editions

    * Fits USA & Export models.
    ** Fitment on most 2016+ Australian & European models requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets to pass through. Instructions are not currently provided for this modification.
    *** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front fascia) requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets. Instructions are not currently provided for this modification.
    Does NOT fit with the following products:
    OEM Tow Hooks (part# 82212095)
    Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)
    INSTALLATION INSTRUCTIONS


Customer Reviews

Based on 33 reviews Write a review

Related Items


CURRENCY NOTICE

All orders are charged in AUD Dollars.
Prices in other currencies are estimates only.

OK

Out of Stock

Apologies, one of the items required
for this product is out of stock.

OK
out of region choose vehicle account regions

CHOOSE YOUR SHOP

SHOP NOTICE

We’re unable to change your Shop while in the Accounts section. Please leave the Accounts section and try again.

OK
AE region

SHOP NOTICE

Our Middle-East Shop will launch soon. Please provide your details to stay informed.


This field is required.
This field is required.