
The Store
Please select your vehicle to continue
*We will remember your selection for the next time you visit.
ANTI-SEIZE (4g Pouch)
$1.99 AUD
Thread-Magic® Anti-Seize helps avoid stuck bolts for easy removal. Especially valuable on the underside of a 4x4 that is subjected to harsh off-road environments, (mud, water & salt water). Anti-Seize won't wash out, is heat resistant (withstands temps to 649°C), provides extra protection against corrosion and even works on bi-metal applications. Prevents seizing, galling, and damage during disassembly.
Thread-Magic® Anti-Seize helps avoid stuck bolts for easy removal. Especially valuable on the underside of a 4x4 that is subjected to harsh off-road environments, (mud, water & salt water). Anti-Seize won't wash out, is heat resistant (withstands temps to 649°C), provides extra protection against corrosion and even works on bi-metal applications. Prevents seizing, galling, and damage during disassembly.
1001 uses... including lug nuts, brake lube assembly and anchor pins, engine head bolts, spark plug threads, oxygen sensor threads, exhaust manifold studs, EGR fittings, starter & alternator bolts, and more!
Provided in a single use packet that provides enough anti-seize for 10-20 bolts, (depending on size).
BOLT HEAD PROTECTORS (Slotted)
$17.99 AUD
Chief Products Bolt Head Protectors (Slotted) are specifically designed to integrate with our product line. They provide a simple and effective way to protect exposed bolt heads underneath your WK2. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The slotted design keys into the product and locks it into place when the bolt is tightened, eliminating any chance the bolt head protector can spin or move when hit off-road.
Chief Products Bolt Head Protectors (Slotted) are specifically designed to integrate with our product line. They provide a simple and effective way to protect exposed bolt heads underneath your WK2. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The slotted design keys into the product and locks it into place when the bolt is tightened, eliminating any chance the bolt head protector can spin or move when hit off-road. Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all,Ā they install easily like a normal washer.
FEATURES
6061 ALUMINIUMĀ (Excellent Corrosion Resistance)
EASY INSTALLATIONĀ (Difficulty = 1/10)
SIZES
M6 --> Fits M6 Bolts
M8 --> Fits M8 Bolts
BOLT HEAD PROTECTORS (Standard)
$12.49 AUD
Chief Products Bolt Head Protectors (Standard) are a simple and effective way to protect exposed bolt heads underneath your 4x4. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The extra width and thickness of the design makes them an extremely stout washer (that can distribute clamping force over a greater area).
Chief Products Bolt Head Protectors (Standard) are a simple and effective way to protect exposed bolt heads underneath your 4x4. The angled sides protect the bolt head from rocks and other off-road obstacles that would normally cause damage. The extra width and thickness of the design makes them an extremely stout washer (that can distribute clamping force over a greater area). Each one is manufactured out of 6061 Aluminium to protect against corrosion and the harsh life they're sure to encounter under your 4x4. Best of all, they install easily like a normal washer.
FEATURES
6061 ALUMINIUMĀ (Excellent Corrosion Resistance)
EASY INSTALLATIONĀ (Difficulty = 1/10)
SIZES
M6 (38mm) --> Fits M6 Bolts (38mm outside diameter)
M8 (38mm) --> Fits M8 Bolts (38mm outside diameter)
GIFT CARD
$25.00 AUD
Are you shopping for someone else but not sure what to get them? Give them the gift of choice with a Chief Products Gift Card. Our Gift Cards are delivered instantly by email and contain instructions to redeem them at checkout.
Are you shopping for someone else but not sure what to get them? Give them the gift of choice with a Chief Products Gift Card. Our Gift Cards are delivered instantly by email and contain instructions to redeem them at checkout.
HAWSE WINCH FAIRLEAD
$109.99 AUD
Chief Products Hawse Winch Fairlead delivers slim lines, large smooth radiuses (perfect for synthetic ropes) and a mirror polish finish. For maximum strength each fairlead is CNC machined from a solid billet of 6061 T6 Aluminium. We then perform high-speed machine polishing to ensure every surface is smooth and radiant. As a final process to protect the finish and deliver maximum protection from the elements, each fairlead receives 20µm of Type II Anodising. To truly appreciate the quality workmanship, you need to hold one in your hand. Best of all, we provide (2) colours so you can choose the style that looks best on your machine.
Chief Products Hawse Winch Fairlead delivers slim lines, large smooth radiuses (perfect for synthetic ropes) and a mirror polish finish. For maximum strength each fairlead is CNC machined from a solid billet of 6061 T6 Aluminium. We then perform high-speed machine polishing to ensure every surface is smooth and radiant. As a final process to protect the finish and deliver maximum protection from the elements, each fairlead receives 20µm of Type II Anodising. To truly appreciate the quality workmanship, you need to hold one in your hand. Best of all, we provide (2) colours so you can choose the style that looks best on your machine.
1.1kg | INSTALLED WEIGHTĀ |
295.5mm | TOTAL WIDTHĀ (11.63 inches) |
70mm | TOTAL HEIGHTĀ (2.76 inches) |
29mm | TOTAL DEPTHĀ (1.14 inches) |
1 | Hawse Winch Fairlead (6061 T6 Aluminium) |
2 | M12 x 30mm High Tensile (12.9) Socket Head Bolts (Zinc Plated) |
JEEP WHEEL CENTRE CAPS (Chrome & Gloss Black)
$39.99 AUD $91.44 AUD
These 'Jeep' Wheel Centre Caps are a great way to set your Jeep apart from the rest. Available in Gloss Black or Chrome with a raised Jeep logo.
These 'Jeep' Wheel Centre Caps are a great way to set your Jeep apart from the rest. Available in Gloss Black or Chrome with a raised Jeep logo.
FITMENT
2011 - 2018 Jeep Grand Cherokee (Wheel Codes - WF6, WPR, WPD, WSB, WRJ, WP2, WFF, WPK, WRD, WSC & WSG)
2011 - 2018 Jeep Compass & Jeep Patriot (Wheel Codes - WFW, WPN, WNF, WFE & WPW)
2011 - 2018 Jeep Wrangler (Wheel Codes - WPT & WFC)
PARTĀ #
Gloss Black - 1LB77DX8AB
Chrome - 1LB77SZ0AC (Replaces 1LB77SZ0AB)
SIZE
63.5mm (2.5")
NOTES
Sold individually.
ROOF RACK (10x T-Nuts)
$49.99 AUD
Chief Products T-Nuts are engineered to provide maximum performance and compatibility with Chief Products Roof Rack System. We offer our (10) pack of T-Nuts in (3) sizes (M6, M8 & M10) to accommodate any accessory you find. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.
Chief Products T-Nuts are engineered to provide maximum performance and compatibility with Chief Products Roof Rack System. We offer our (10) pack of T-Nuts in (3) sizes (M6, M8 & M10) to accommodate any accessory you find. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.
10 | M6 T-Nuts (Grade 10.9) (Black Oxide) |
10 | M8 T-Nuts (Grade 10.9) (Black Oxide) |
10 | M10 T-Nuts (Grade 10.9) (Black Oxide) |
ROOF RACK (2x Planks) [1146mm]
$348.99 AUD
Planks are a key building block of our modular roof rack system. This KIT includes (2) Planks; measuring 1146mm (45.12") long, 156mm (6.14") wide and an amazing 25mm (0.98") thin. Our Planks are designed so they can be easily bolted to our Mounting Rails in various configurations. This allows our customers to create a āRoof Platformā that best suits their needs. It also enables our customers to easily add/move/change their Planks to meet whatever future needs may arise. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to bolt/fasten to the Plank at any point along the entire length of the Plank.
Planks are a key building block of our modular roof rack system. This KIT includes (2) Planks; measuring 1146mm (45.12") long, 156mm (6.14") wide and an amazing 25mm (0.98") thin. Our Planks are designed so they can be easily bolted to our Mounting Rails in various configurations. This allows our customers to create a āRoof Platformā that best suits their needs. It also enables our customers to easily add/move/change their Planks to meet whatever future needs may arise. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to bolt/fasten to the Plank at any point along the entire length of the Plank.
We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio. As an example, one of our Planks can easily hold a 300kg person (standing directly in the middle of a 1.2M Plank) and it only weighs 2.5kg.
1146mm | PLANK LENGTH (45.12 inches) |
156mm | PLANK WIDTH (6.14 inches) |
25mm | PLANK THICKNESS (0.98 inches) |
2.56kg | INSTALLED WEIGHT (1 plank) |
ROOF RACK (2x Tie-Down Plates)
Out of Stock $117.99 AUD
Our Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
Our Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
115mm | TIE-DOWN PLATE LENGTH (fully assembled) |
110mm | TIE-DOWN PLATE WIDTH (fully assembled) |
0.50kg | INSTALLED WEIGHT --> 1x Tie-Down Plate |
2 | TIE-DOWN PLATE (Top) (Cast from Aircraft-Grade Aluminium Alloy) |
2 | TIE-DOWN PLATE (Bottom) (5mm High-Strength Steel) |
4 | M8 x 20mm BOLTS (Round Head - Socket) (316 Stainless Steel) |
4 | M8 WEDGE-LOCK WASHERS (Zinc Flake Coating) |
1 | Installation Instructions |
TIE-DOWN STRAP HOOK on CENTRE SECTION |
ROPE pass through CENTRE SECTION |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M12 CARRIAGE BOLT into SQUARE HOLE (Lower Plate) (HEAVY DUTY --> up through lower plate) |
(2) T-NUT SLOTS --> M8, M10 & M12 BOLT pass through both PLATES (nut below lower plate) |
(2) M8 MOUNTING BOLTS --> REPLACE with LONGER MOUNTING BOLT (using weld nut on lower plate) |
ROOF RACK (4x Plank End-Caps)
$56.99 AUD
Our Plank End-Caps provide a nice finish to the ends of our Planks and are great for anyone that isn't running our WK2 Roof Rack (Platform Frame KIT). This KIT includes (4) Plank End-Caps, (enough for 2x Planks). They bolt on easily and feature (7) slots (just like a traditional Jeep grille).
Our Plank End-Caps provide a nice finish to the ends of our Planks and are great for anyone that isn't running our WK2 Roof Rack (Platform Frame KIT). This KIT includes (4) Plank End-Caps, (enough for 2x Planks). They bolt on easily and feature (7) slots (just like a traditional Jeep grille).
ROOF RACK (Roof Top Tent KIT)
$76.99 AUD
Our Roof Top Tent KIT is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks.
Our Roof Top Tent KIT is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks.
SHOP RAGS [5 PACK]
$15.00 AUD
The classic shop rag is all about function. Perfect for wiping grease off your hands in the garage or a bit of mud off your favourite tools in the bush. We print these classic rags with a special ink that is extremely rugged and resistant to grease and oil. Stuff them in a tool bag or the back of your garage. They're simple, durable and ready to withstand the tough life they're sure to encounter.
The classic shop rag is all about function. Perfect for wiping grease off your hands in the garage or a bit of mud off your favourite tools in the bush. We print these classic rags with a special ink that is extremely rugged and resistant to grease and oil. Stuff them in a tool bag or the back of your garage. They're simple, durable and ready to withstand the tough life they're sure to encounter.
Designed and field tested byĀ Chief Products Basecamp Team - Mudgeeraba, Australia.
STICKER PACK
$15.00 AUD
A collection of (23) high quality stickers, providing guaranteed style on the fly. Perfect for use on internal combustion machines, windows, luggage, camping gear and small children.
A collection of (23) high quality stickers, providing guaranteed style on the fly. Perfect for use on internal combustion machines, windows, camping gear and small children.
Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.
TRAIL RATED BADGE [OFFICIAL]
$69.99 AUD $109.15 AUD
These 'Trail Rated' Badges are a great way to set your Jeep apart from the rest. The Grey-Silver badge is an exact replacement for the Trail Rated emblem used on left front fender of many Jeep models. The Red-Silver badge was originally featured on the 2013 Jeep Grand Cherokee Trailhawk.
These 'Trail Rated' Badges are a great way to set your Jeep apart from the rest. The Grey-Silver badge is an exact replacement for the Trail Rated emblem used on left front fender of many Jeep models. The Red-Silver badge was originally featured on the 2013 Jeep Grand Cherokee Trailhawk.
FITMENT
2005 - 2016 Jeep Grand Cherokee
2005 - 2012 Jeep Liberty
2007 - 2016 Jeep Wrangler
2006 - 2010 Jeep Commander
2007 - 2016 Jeep Compass
2007 - 2016 Jeep Patriot
PARTĀ #
Grey-Silver - 55157317AB
Red-Silver - 68194212AA
SIZE
60.5mm (2.38")
NOTES
Sold individually.
TRUCKER CAP (Classic Logo)
$25.00 AUD
We designed this classic trucker for the Chief Products team and those who share our appetite for adventure. It features heavy-duty nylon mesh on the back, with Chief Products classic logo up front. Plastic snap adjuster, one size fits most.
We designed this classic trucker for the Chief Products team and those who share our appetite for adventure. It features heavy-duty nylon mesh on the back, with Chief Products classic logo up front. Plastic snap adjuster, one size fits most.
Designed and field tested byĀ Chief Products Basecamp Team - Mudgeeraba, Australia.
WEDGE-LOCK WASHER (Extended)
$0.79 AUD
Bolted joints underneath your 4x4 need to withstand stresses from multiple frontsĀ -Ā loosening due to vibration (off-road corrugations),Ā loosening due to dynamic loads (off-road flexing and impacts)Ā as well asĀ slackening due to settlement and relaxation.
Wedge-Lock ExtendedĀ Washers provide an enlarged outer diameter that is designed to distribute loads over a larger surface area.
Bolted joints underneath your 4x4 need to withstand stresses from multiple fronts - loosening due to vibration (off-road corrugations), loosening due to dynamic loads (off-road flexing and impacts) as well as slackening due to settlement and relaxation.
Wedge-Lock ExtendedĀ Washers provide an enlarged outer diameter that is designed to distribute loads over a larger surface area. For this reason Wedge-Lock ExtendedĀ Washers are ideal for use on large/slotted holes, painted/sensitive surfaces or soft materials.
WEDGE-LOCK WASHER (Nord-LockĀ® X-Series)
$1.43 AUD
Bolted joints underneath your 4x4 need to withstand stresses from multiple frontsĀ -Ā loosening due to vibration (off-road corrugations),Ā loosening due to dynamic loads (off-road flexing and impacts)Ā as well asĀ slackening due to settlement and relaxation.
Utilising a unique multifunctional design, Nord-LockĀ® X-Series Washers offer the highest security against bolt loosening and slackening.
Bolted joints underneath your 4x4 need to withstand stresses from multiple fronts - loosening due to vibration (off-road corrugations), loosening due to dynamic loads (off-road flexing and impacts) as well as slackening due to settlement and relaxation.
Utilising a unique multifunctional design, Nord-LockĀ® X-Series Washers offer the highest security against bolt loosening and slackening. Combining Nord-Lockās unrivaled wedge-effect solution (to prevent spontaneous loosening) with an exceptional spring effect (to compensate for loss of preload due to slackening), Nord-LockĀ® X-Series Washers give you a total security option for those situations in which there can be no compromise.
WK2 AIR SUSPENSION KIT
$44.99 AUD
An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.
An installation KIT for the WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Quadra-Lift Air Suspension.
WK2 CHASSIS MOUNTS (Front)
$259.99 AUD
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.
Chief Products WK2 Chassis Mounts (Front) provide a secure connection to the front of your WK2 (Jeep Grand Cherokee 2011-2020). Engineered to distribute forces to the chassis of your WK2 over multiple mounting points (for maximum strength and reliability). These Chassis Mounts play a critical role in the Engineer Certified Ratings (10,000lbs WLL) of our WK2 Off-Road Front Bumper and WK2 Hidden Winch Mount. They've been FEA tested, tested by independent 3rd parties (including crash testing for ADR compliance) and real-world tested in numerous scenarios; including off-axis recoveries and snatch block recoveries. In other words, this is a product you can count on when you're stuck in the middle of nowhere and you need it most.
WK2 HIDDEN WINCH MOUNT
$759.98 AUD
Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with all of your Jeep's safety systems (air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensor systems). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.
-
Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with all of your Jeep's safety systems (air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensor systems). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.
FEATURESHIGH-STRENGTH STEELĀ (High Strength To Weight Ratio)DURABLE POWDER COAT FINISHĀ (Advanced Polyester Thermosetting Powder)E-COATĀ (Industry Leading Corrosion Protection)Drainage SlotsEASY INSTALLATIONĀ (Difficulty = 4/10)SPECIFICATIONS10,000lbs WORKING LOAD LIMITĀ [Engineer Certified] 12.85kg INSTALLED WEIGHTĀ (approximate without winch) Same As Stock APPROACH ANGLEĀ (lower front fascia installed) INCLUDES1 Winch Cradle (2011-2015) 2 WK2 Chassis Mounts (Front) 2 Bonnet Supports 2 Chassis Support Brackets 2 Chassis Mounting Plates 6 M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated) 6 M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 25mm (10.9) Bolts (Zinc Plated) 2 M6 x 25mm (10.9) Bolts (Zinc Plated) 6 M12 Wedge-Lock Extended Washers (Zinc Flake Coating) 6 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 32mm Washers (Zinc Plated) 2 M10 (CL10) Hex Nuts (Zinc Plated) 4 XMas Tree Fasteners (Black Plastic) 1 4g pouch Anti-Seize 1 Installation Instructions 1 Winch Cradle (2016+) 2 WK2 Chassis Mounts (Front) 2 Bonnet Supports 2 Chassis Support Brackets 2 Chassis Mounting Plates 6 M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated) 6 M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 25mm (10.9) Bolts (Zinc Plated) 2 M6 x 25mm (10.9) Bolts (Zinc Plated) 6 M12 Wedge-Lock Extended Washers (Zinc Flake Coating) 6 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 32mm Washers (Zinc Plated) 2 M10 (CL10) Hex Nuts (Zinc Plated) 4 XMas Tree Fasteners (Black Plastic) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
High-StrengthWe've engineered our hidden winch system from the ground-up to evenly distribute recovery forces to the chassis of the WK2. This unique approach is especially important during high load pulls and off-axis recoveries that can easily twist (and sometimes even tear) the monocoque chassis of the WK2. Unlike our competitors, we mount to the chassis in multiple locations and strategically use high-strength steels to ensure recovery forces are evenly distributed and don't overload the chassis mounting points. Through FEA computer modelling and (12) months of real world testing we've delivered a high-strength winch mounting system that you can rely on when you need it most.
Maintain OEM AppearanceThe WK2 Hidden Winch Mount can be installed behind your bumper and lower front fascia, maintaining the great looks of your Jeep Grand Cherokee. Then if needed you can still easily remove the lower front fascia when heading off-road.
Low Installed WeightOnly 12.85kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Better CoolingBy positioning our winch cradle lower than our competitors, we're able to achieve significantly better air flow to the radiator, which delivers much better cooling in hot weather. This is especially important if you're towing or have additional items (off-road lights, etc.) restricting airflow to the radiator core.
Lower Winch PositionOur lower winch position provides numerous benefits. In addition to providing significantly better cooling, it also enables installation of taller winches, doesnāt interfere with number plate mounting and positions the winch directly between the frame rails for maximum strength.
Maximum Approach AngleSince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a hidden winch mounting system that is compatible with the adaptive cruise control system on all WK2 models.
Compatible With Parking SensorsThrough careful engineering & testing we've delivered a winch mount that is compatible with parking sensors on all WK2 models.
Compatible With Our Entire Product LineAlready own our WK2 Lower Front Guard, WK2 Sump Protection Plate, WK2 Recovery Hooks, WK2 Recovery Points or WK2 Nudge Bar? Weāve designed the WK2 Hidden Winch Mount to integrate easily with all of our products.
Compatible With Excellent Front Recovery OptionsCan be installed with OEM Tow Hooks or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Real World TestingThere arenāt many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting required. Installation of lower front fascia requires cutting a hole for the winch fairlead.WK2 Hidden Winch Mount fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** Fitment on Summit & High Altitude (including all models with same lower front fascia) requires permanent removal of the lower front fascia.*** Fitment on SRT requires cutting-modification of the lower front fascia, as well as relocation of the power steering cooler (no bracketry is provided for power steering cooler relocation).Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:Warn Zeon 10-S PlatinumSmittybilt Gen2 X20 Comp (10,000lb)** OEM Tow Hooks (part# 82212095)
* Fitment with Australian versions of the WK2 Lower Front Guard (purchased before March 2017), requires (2) metal tabs be cut-removed from the centre section of the WK2 Lower Front Guard. This modification is not required for USA model WK2 Lower Front Guards or any WK2 Lower Front Guards purchased after March 2017.
** You can install OEM Tow Hooks OR the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. You cannot install OEM Tow Hooks AND the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. For more information read our Support Article, (here).Does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS -
WK2 HIDDEN WINCH MOUNT (ACC Camera KIT)
$29.99 AUD
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting bracket & hardware for the Adaptive Cruise Control Camera.
WK2 HIDDEN WINCH MOUNT (OEM Tow Hooks KIT)
$69.99 AUD
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.
An installation kit for the WK2 Hidden Winch Mount. It provides the required mounting brackets & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount.
* Please note; this kit will not allow installation of OEM Tow Hooks with any other product. It only provides compatibility for the WK2 Hidden Winch Mount (when the WK2 Hidden Winch Mount is installed on its own).
WK2 HIDDEN WINCH MOUNT (WK2 Lower Front Guard KIT)
$53.99 AUD
An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.
An installation kit for the WK2 Hidden Winch Mount. It provides a strengthening bracket for the WK2 Lower Front Guard. This bracket is recommended, but not required.
WK2 LOWER FRONT GUARD
Out of Stock $769.99 AUD
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
-
Chief Products WK2 LOWER FRONT GUARD is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 LOWER FRONT GUARD so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
We've created a modular system of protection products for the WK2, this means our WK2 LOWER FRONT GUARD will integrate perfectly with all of our other products --> WK2 HIDDEN WINCH MOUNT, WK2 SUMP PROTECTION PLATE, WK2 NUDGE BAR, WK2 RECOVERY HOOK and WK2 RECOVERY POINT.
FEATURESHIGH-STRENGTH STEEL (High Strength to Weight Ratio)DURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)AIRFLOW SLOTSDRAINAGE SLOTSEASY INSTALLATION (Difficulty = 4/10)SPECIFICATIONS14.90kg INSTALLED WEIGHT --> Standard Guard 15.20kg INSTALLED WEIGHT --> ACC Guard +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard) +10.6° APPROACH ANGLE (Summit & SRT with Standard Guard) +8.6° APPROACH ANGLE (Summit & SRT with ACC Guard) *  Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.INCLUDES1 Guard KIT (Standard)
1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions
1 Guard KIT (ACC) 1 Centre Section (5mm High-Strength Steel) 2 Chassis Mounting Brackets 2 Corner Mounting Brackets 2 Corner Guards 1 Air Dam Reinforcement Bracket 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 2 M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M10 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated) 14 M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 18 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 x 8mm Bushings (6061 Aluminium) 12 M6 x 25mm Washers (Zinc Plated) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
OFF-ROAD PROTECTIONCritical off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via numerous sub-frame braces and high-strength steel that is 5mm thick on the main centre section.MAINTAIN OEM APPEARANCEThe lower front fascia can be easily installed over the WK2 LOWER FRONT GUARD, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 LOWER FRONT GUARD.LOW INSTALLED WEIGHTOnly 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).BETTER COOLING PERFORMANCEOur design provides significant air flow to the lower radiator core. This is especially important if you're towing, operating in hot climates or have additional items (off-road lights, etc.) restricting airflow to the radiator core. Considering a large portion of airflow comes up from the road surface, we're often surprised how many competing lower protection products are missing this critical feature.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.CCOMPATIBLE With EXCELLENT FRONT RECOVERY OPTIONSCan be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg).EASILY & INEXPENSIVELY REPAIREDBecause we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.LOW COSTSignificantly less expensive than a Bull Bar, especially when you include shipping and installation costs.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.BOLT HEAD PROTECTIONOur Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.REAL WORLD TESTINGThere arenāt many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Bolts into existing mounting points in the frame, no drilling or cutting needed.Fitment confirmed on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions*Ā Ā Fits USA & Export models.**Ā Ā Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.***Ā Ā Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:Uneek WK2 Grand Cherokee Bash PlateRocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)OEM Tow Hooks (part# 82212095)Product does NOT fit with the following products:Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)Jeep Belly Pan (part# 68089029AC)INSTALLATION INSTRUCTIONS
-
WK2 LOWER FRONT GUARD (Guard KIT)
$79.99 AUD
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
An installation kit for the WK2 LOWER FRONT GUARD. It provides the appropriate centre guard for the WK2 LOWER FRONT GUARD.
WK2 LOWER FRONT GUARD (Upper Fascia)
$169.99 AUD
Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
-
Chief Products WK2 LOWER FRONT GUARD (Upper Fascia) delivers improved styling for all 2013-2021 Jeep Grand Cherokees with a WK2 LOWER FRONT GUARD installed. The 3-piece design ensures easy installation and a low installed weight. Best of all, we're able to deliver this improved styling without negatively effecting vehicle approach angle or any of the vehicle safety systems.
FEATURESLOW INSTALLED WEIGHTDURABLE POWDER COAT FINISH (Textured Black)E-COAT (Industry Leading Corrosion Protection)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS2.6kg INSTALLED WEIGHT +4.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with Standard Guard) +2.2° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk with ACC Guard) +10.6° APPROACH ANGLE (Summit & SRT with Standard Guard) +8.6° APPROACH ANGLE (Summit & SRT with ACC Guard) *  Approach Angle calculations represent improvement over stock (based on stock tyres, lower front fascia removed and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.* REQUIRED *
WK2 LOWER FRONT GUARD (Upper Fascia) cannot be installed without WK2 LOWER FRONT GUARD. The (2) products integrate seamlessly to provide robust protection for the front of your WK2. -
STYLEOur design team paid attention to every facet, so we could deliver a product that looks great from every angle and compliments the lines of your WK2 with a fully integrated appearance.MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.COMPATIBLE with ALL VEHICLE SYSTEMSFull compatibility with all vehicle systems (Air Bags, Blind Spot Monitoring, ParkSense Front & Rear Park Assist System, Adaptive Cruise Control, Full-Speed Forward Collision Warning with Active Braking, LaneSense Lane Departure Warning with Lane Keep Assist & Parallel and Perpendicular Park Assist).COMPATIBLE with FRONT RECOVERY POINTSCompatible with Chief Products WK2 Recovery Points & WK2 Recovery Hooks (engineer rated to 4,500kg) as well as OEM Tow Hooks (approximate engineer rating of 2,500kg).MAXIMUM APPROACH ANGLESince our design doesn't extend past the front of your WK2, the maximum approach angle is retained.VEHICLE INTEGRATED DESIGNEngineered from the ground up to integrate seamlessly with your WK2 (Jeep Grand Cherokee 2011-2020) and Chief Products WK2 Lower Front Guard. Providing compatibility with all vehicle safety systems, maximum approach angle, a design that doesn't impede critical air flow to the radiator core (critical for towing & off-road performance) and styling that closely matches the lines of your Jeep.LOW INSTALLED WEIGHTOnly 2.6kg when fully installed.EASY TO INSTALLWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.INDUSTRY LEADING CORROSION PROTECTIONWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. This industry-leading process (often only offered by OEMs) ensures full-coverage in hard to reach areas that are often missed by other coating processes. On top of the electrophoretic coating, we apply 80µm of an extremely durable and UV stable powder coat (advanced polyester thermosetting powder). This 2 layer approach ensures maximum corrosion protection for all steel parts.REAL WORLD TESTINGThere arenāt many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.TOP QUALITY FINISHING TOUCHESWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
-
Requires WK2 LOWER FRONT GUARD. Bolts to existing mounting points, no drilling or cutting required.Fitment confirmed on the following vehicles:2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions*Ā Ā Fits USA & Export models.**Ā Ā Fitment on Summit & High Altitude (2013-2016) requires permanent removal of the lower front fascia.***Ā Ā Fitment on Summit & High Altitude (2017-2021) and SRT (all model years) requires permanent removal of the lower front fascia and cutting of the plastic bumper.Product does NOT fit on the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions*Ā Ā Does not fit (and is not needed) on 2011 & 2012 Jeep Grand Cherokees (due to a different front bumper design).Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:INSTALLATION INSTRUCTIONS
WK2 NUDGE BAR
$389.99 AUD
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
-
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
FEATURES304 Stainless Steel (Excellent Corrosion & Scratch Resistance)Bar = Mirror Polished or Durable Powder Coat FinishMounting ArmsĀ = E-Coat + Durable Powder Coat FinishEasy Installation (Difficulty = 2/10)SPECIFICATIONS10.6kg Fully Installed Weight (Including Mounting Hardware) 63.5mm Bar Diameter 629mm Mounting Tab Total Length (24.76 inches) 599mm Mounting Tab Slot Length (23.58 inches) 123 Brinell Hardness (Excellent Scratch Resistance) 29.4Ė Approach Angle (lower front fascia removed + standard suspension) 33.3Ė Approach Angle (lower front fascia removed + air suspension OR2) Same As Stock Approach Angle (lower front fascia installed) INCLUDES1 Gloss Black Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 1 Mirror Polished Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONSMORE INFO*Parking Sensor Compatibility - We provide 95% compatibility (read more). -
Excellent Approach AngleSince our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.
Parking Sensor CompatibilityThrough careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on allĀ WK2 models.
High StrengthOur innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.
Highly Scratch ResistantBy using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.
Low Installed WeightOnly 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Accommodates Numerous Lighting & Accessory OptionsThe accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.
Contoured To FitThe accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.
Compatible With Front Recovery PointsCan be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.
Guards Against Damage During RecoveryThe mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Mirror Polish That LastsOur mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.
Top Quality Finishing TouchesWe include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for the Mounting Brackets, (see notes below).WK2 Nudge Bar fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** Fitment on most 2016+ Australian & European modelsĀ requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets to pass through. Instructions are not currently provided for this modification.*** Fitment on Summit,Ā High Altitude, SRT &Ā Trackhawk (including all models with same lower front fascia)Ā requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets. Instructions are not currently provided for this modification.Fitment confirmed with the following products:Does NOT fit with the following products:OEM Tow Hooks (part# 82212095)Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS
WK2 NUDGE BAR (Light Bar Mount KIT)
$43.99 AUD
Chief Products Light Bar Mount KIT provides an easy way to mount larger-deeper light bars on Chief Products WK2 Nudge Bar. Some light bars (with a lot of depth) need to be moved forward to avoid touching the grille, especially on 2013-2015 WK2s. Our Light Bar Mount KIT, moves the light bar forward while also providing extra mounting strength.
Chief Products Light Bar Mount KIT provides an easy way to mount larger-deeper light bars on Chief Products WK2 Nudge Bar. Some light bars (with a lot of depth) need to be moved forward to avoid touching the grille, especially on 2013-2015 WK2s. Our Light Bar Mount KIT, moves the light bar forward while also providing extra mounting strength.
1 | Light Bar Mount Bracket - LH (with Zinc Coated Press Studs) |
1 | Light Bar Mount BracketĀ - RH (with Zinc Coated Press Studs) |
2 | M6 Wedge-Lock Extended Washers (Zinc Flake Coating) |
2 | M8 Wedge-Lock Extended Washers (Zinc Flake Coating) |
2 | M6 (CL8) Flanged Nut (Zinc Plated) |
2 | M8 (CL8) Flanged Nut (Zinc Plated) |
WK2 NUDGE BAR (Mounting Arms Upgrade KIT)
$289.99 AUD
Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.
Chief Products WK2 Nudge Bar (Mounting Arms Upgrade KIT) allows customers with an older WK2 Nudge Bar (purchased before October 2019) to upgrade to the latest Mounting Arms. These new Mounting Arms provide more adjustment, allowing customers to mount their WK2 Nudge Bar closer to (or farther from) the vehicle. Mounting closer to the vehicle can be helpful when having troubles with the parking sensor system. Mounting farther from the vehicle can be helpful when a customer needs more space to mount larger off-road lights.
2 | Chassis MountingĀ Arms |
4 | Chassis Mounting Plates |
2 | M10 x 60mmĀ Heavy Duty Washers (Black EDP Coating) |
1 | Installation Instructions |
WK2 NUDGE BAR [BAR ONLY]
$309.99 AUD
Chief Products WK2 Nudge Bar [BAR ONLY] provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
Chief Products WK2 Nudge Bar [BAR ONLY] provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and it includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. We provide (2) versions, so you can choose the one that best fits the style of your WK2.
63.5mm | BAR DIAMETER |
629mm | MOUNTING TAB TOTAL LENGTHĀ (24.76 inches) |
599mm | MOUNTING TAB SLOT LENGTHĀ (23.58 inches) |
123 | BRINELL HARDNESSĀ (Excellent Scratch Resistance) |
1 | Bar Assembly (304 Stainless Steel) |
1 | Installation Instructions |
WK2 OFF-ROAD FRONT BUMPER
$1,295.99 AUD
Chief Products WK2 Off-Road Front Bumper delivers world-class off-road protection for the front of your WK2 (Jeep Grand Cherokee, 2011-2020). Engineered to integrate fully with the styling and function of your WK2. The WK2 Off-Road Front Bumper's modular design allows you to build exactly what you need, while delivering industry-leading performance in several important categories; improved approach angle (for better off-road performance), high-volume airflow (critical for towing & off-road performance), industry leading corrosion protection (E-Coat, SS316 Fasteners & Aluminium Alloy Accessories), low installed weight (providing better fuel economy & improved suspension performance) and full compatibility with all safety systems (air bags, advanced parking sensors, adaptive cruise control, forward collision warning and lane departure warning). No matter what model WK2 you have, Chief Products WK2 Off-Road Front Bumper delivers exceptional off-road performance, and a degree of fit-and-finish you have to see in person to truly appreciate.
-
Chief Products WK2 Off-Road Front Bumper delivers world-class off-road protection for the front of your WK2 (Jeep Grand Cherokee, 2011-2020). Engineered to integrate fully with the styling and function of your WK2. The WK2 Off-Road Front Bumper's modular design allows you to build exactly what you need, while delivering industry-leading performance in several important categories; improved approach angle (for better off-road performance), high-volume airflow (critical for towing & off-road performance), industry leading corrosion protection (E-Coat, SS316 Fasteners & Aluminium Alloy Accessories), low installed weight (providing better fuel economy & improved suspension performance) and full compatibility with all safety systems (air bags, advanced parking sensors, adaptive cruise control, forward collision warning and lane departure warning). No matter what model WK2 you have, Chief Products WK2 Off-Road Front Bumper delivers exceptional off-road performance, and a degree of fit-and-finish you have to see in person to truly appreciate.
We engineered the WK2 Off-Road Front Bumper from the ground up (and performed extensive real-world testing)to ensure we delivered a product you could count on when you need it most. Best of all, the modular design provides an unprecedented amount of configurability, allowing you to mix-and-match components to create the exact Off-Road Front Bumper you want. Want to install a winch? No problem. Want to install some off-road lights? No problem. Want a great place to mount your number plate? No problem (we give you 2 options). Want industry-leading recovery points? No problem. Want colour and accessory options, so the bar matches your style? No Problem. Just want to keep it super simple? No worries, we've got your back too. Build exactly what you want.
FEATURESHIGH-STRENGTHVEHICLE INTEGRATED DESIGN (Compatible with all Vehicle Systems)MODULAR DESIGN (Provides Unprecedented Configurability)HIGH-VOLUME AIR-FLOW (Critical for Towing & Off-Road Performance)MAXIMUM QUALITY FASTENERS (Blackened + SS316 or High-Tensile)WEDGE-LOCK WASHERS (Blackened + SS316)DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)E-COAT (Industry Leading Corrosion Protection)EASY INSTALLATION (Difficulty = 5/10 or 6/10 for Summit)SPECIFICATIONS28.5kg INSTALLED WEIGHT --> [BUMPER ONLY] 33.3kg INSTALLED WEIGHT --> Bare Bones Edition 37.5kg INSTALLED WEIGHT --> Overland Edition 53.4kg INSTALLED WEIGHT --> Tactical Edition (2011-2015) 54.2kg INSTALLED WEIGHT --> Tactical Edition (2016+) 54.4kg INSTALLED WEIGHT --> Stealth Edition (2011-2015) [LIMITED] 55.2kg INSTALLED WEIGHT --> Stealth Edition (2016+) [LIMITED] 54.4kg INSTALLED WEIGHT --> Apex Edition (2011-2015) 55.2kg INSTALLED WEIGHT --> Apex Edition (2016+) +0.1° APPROACH ANGLE (Laredo, Limited, Overland & Trailhawk) +6.5° APPROACH ANGLE (Summit & SRT) *  Approach Angle calculations represent improvement over stock (based on stock tyres and air suspension in STD height). Raising the air suspension or installing larger tyres will increase the approach angle improvements.INCLUDES1 [BUMPER ONLY] 1 WK2 CHASSIS MOUNTS (Front) 1 WK2 OFF-ROAD FRONT BUMPER (Apex Grille) [SILVER] 1 WK2 OFF-ROAD FRONT BUMPER (Mach II Aero-Bar) [SILVER] 1 Installation Instructions 1 [BUMPER ONLY] 1 WK2 CHASSIS MOUNTS (Front) 1 WK2 OFF-ROAD FRONT BUMPER (Nomad Grille) 1 Installation Instructions 1 [BUMPER ONLY] 0 WK2 CHASSIS MOUNTS (Front) --> NOT INCLUDED (REQUIRED FOR INSTALL) 1 Installation Instructions EDITIONS -
HIGH-STRENGTH OFF-ROAD PROTECTIONEXCELLENT APPROACH ANGLEHIGH-FLOW COOLING PERFORMANCELOW INSTALLED WEIGHTVEHICLE INTEGRATED DESIGNUNPRECEDENTED CONFIGURABILITYINNOVATIVE SUITE OF ACCESSORIESEASILY MOUNT ACCESSORIESVEHICLE COMPATIBILITYCOMPATIBLE with ALL VEHICLE SYSTEMSCOMPATIBLE with FRONT RECOVERY POINTSCOMPATIBLE with MOST WINCHESSTYLEFIT & FINISHEASY TO INSTALLINDUSTRY LEADING CORROSION PROTECTIONMAXIMUM QUALITY FASTENERSREAL WORLD TESTINGTOP QUALITY FINISHING TOUCHES
-
Bolts to existing mounting points on the chassis. No drilling or cutting of metal parts required. Installation requires cutting/modification of the plastic bumper.Fitment confirmed on the following vehicles:2011 Jeep Grand Cherokee --> (All Models & Limited Editions)2012 Jeep Grand Cherokee --> (All Models & Limited Editions)2013 Jeep Grand Cherokee --> (All Models & Limited Editions)2014 Jeep Grand Cherokee --> (All Models & Limited Editions)2015 Jeep Grand Cherokee --> (All Models & Limited Editions)2016 Jeep Grand Cherokee --> (All Models & Limited Editions)2017 Jeep Grand Cherokee --> (All Models & Limited Editions)2018 Jeep Grand Cherokee --> (All Models & Limited Editions)2019 Jeep Grand Cherokee --> (All Models & Limited Editions)2020 Jeep Grand Cherokee --> (All Models & Limited Editions)2021 Jeep Grand Cherokee --> (All Models & Limited Editions)*Ā Ā Fits USA & Export models.**Ā Ā Fitment on Laredo, Limited, Overland & Trailhawk (including all models with same lower front fascia) requires permanent removal of the lower front fascia and minimal cutting of the plastic bumper.***Ā Ā Fitment on Summit, High Altitude & SRT (including all models with same lower front fascia) requires permanent removal of the lower front fascia and extensive cutting of the plastic bumper (lower portion).Fitment unconfirmed on the following vehicles:2018-2020 Jeep Grand Cherokee - TrackhawkFitment confirmed with the following products:WK2 CHASSIS MOUNTS (Front) Ā Ā Manufactured after MAY 2021 (SKU = CP217000-1000-00-R03)Product does NOT fit with the following products:WK2 CHASSIS MOUNTS (Front) Ā Ā Manufactured before MAY 2021 (SKU = CP217000-1000-00-R02)WK2 HIDDEN WINCH MOUNT (Mounting Brackets) Ā Ā (SKU = CP217000-1000-00-R01)JEEP AUSTRALIA TOW HOOKĀ Ā (part# CH8220WKRH or AUSWK14HOOK)*Ā Ā WK2 OFF-ROAD FRONT BUMPER does not fit with WK2 LOWER FRONT GUARD or WK2 NUDGE BAR. It is designed as an alternative to these products.INSTALLATION INSTRUCTIONS
-
WK2 OFF-ROAD FRONT BUMPER (ACC KIT)
$143.99 AUD
An installation kit for the WK2 Off-Road Front Bumper. It provides the required mounting bracketry & hardware for the Adaptive Cruise Control Camera.
An installation kit for the WK2 Off-Road Front Bumper. It provides the required mounting bracketry & hardware for the Adaptive Cruise Control Camera.
1.30kg | INSTALLED WEIGHT (No Winch) |
0.70kg | INSTALLED WEIGHT (Winch) |
WK2 OFF-ROAD FRONT BUMPER (Advanced Parking Sensor KIT)
$311.99 AUD
WK2 OFF-ROAD FRONT BUMPER (Apex Grille)
$491.99 AUD