• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Roof Rack provides the pinnacle of performance for roof rack systems on the WK2 (Jeep Grand Cherokee, 2011-2020). It delivers industry leading load ratings (150kg dynamic & 600kg static) in an extremely light weight and low profile design. Most impressively, the modular design provides an unprecedented amount of configurability, allowing you to mix-and-match components to create the exact roof rack system you want.

  We've utilised the latest manufacturing techniques and aircraft-grade aluminium alloys to keep the overall installed weight low and accomplish a degree of fit-and-finish you have to see in person to truly appreciate. The smooth top, low profile design and hidden fasteners means we've delivered a roof rack with almost no wind noise, amazingly even with the sunroof open. Best of all, we made it extremely easy to mount accessories - whether you're using t-nuts that slide the entire length of the planks; or our industry leading Tie-Down Plates that easily slide and clamp between the planks. If you're looking for a top-quality place to carry extra gear on your next adventure, there's no doubt we've got you covered.

  FEATURES

  Aircraft-Grade Aluminium Alloys (High Strength to Weight Ratio)

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish

  Modular Design (Provides Unprecedented Configurability)

  Smooth Top Surface (Hidden Fasteners & Flush Mount Tie-Down Plates)

  Hidden Wiring (Channels & Zip-Tie Points for Hidden Wiring)

  Satellite Radio Compatible (Doesn’t Block Satellite Radio Signals)

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  150kg (330lbs)	DYNAMIC LOAD RATING [Independently Certified]
  600kg (1,322lbs)	STATIC LOAD RATING [Independently Certified]
  86mm	OVERALL HEIGHT (above roof line)
  25mm	PLANK THICKNESS
  28.34mm	PLATFORM THICKNESS (fully assembled)
  1490mm	FULL PLATFORM LENGTH (fully assembled)
  1246mm	FULL PLATFORM WIDTH (fully assembled)
  26.02kg	FULL ROOF RACK SYSTEM (fully installed weight)
  20.5kg	SAFARI EDITION (fully installed weight)
  21.8kg	OVERLAND EDITION (fully installed weight)
  11.4kg	ROOF TOP TENT EDITION (fully installed weight)
  9.9kg	BARE BONES EDITION (fully installed weight)
  22kg	[PLATFORM ONLY] (product weight)
  6.4kg	[MOUNTING RAILS ONLY] (product weight)

  INCLUDES

  FULL ROOF RACK SYSTEM

  1	[MOUNTING RAILS ONLY]
  3	ROOF RACK (2x Plank KIT -- 1146MM)
  1	WK2 ROOF RACK (Platform Frame KIT)

  Installation Instructions [COMING SOON]

  SAFARI EDITION

  1	[MOUNTING RAILS ONLY]
  3	ROOF RACK (2x Plank KIT -- 1146MM)
  3	ROOF RACK (4x Plank End-Cap KIT -- Slotted)

  Installation Instructions [COMING SOON]

  OVERLAND EDITION

  1	[MOUNTING RAILS ONLY]
  2	ROOF RACK (2x Plank KIT -- 1146MM)
  2	ROOF RACK (4x Plank End-Cap KIT -- Slotted)
  1	ROOF RACK (Roof Top Tent KIT)
  2	ROOF RACK (2x Tie-Down Plate KIT)

  Installation Instructions [COMING SOON]

  ROOF TOP TENT EDITION

  1	[MOUNTING RAILS ONLY]
  1	ROOF RACK (2x Plank KIT -- 1146MM)
  1	ROOF RACK (4x Plank End-Cap KIT -- Slotted)
  1	ROOF RACK (Roof Top Tent KIT)

  Installation Instructions [COMING SOON]

  BARE BONES EDITION

  1	[MOUNTING RAILS ONLY]
  1	ROOF RACK (2x Plank KIT -- 1146MM)
  1	ROOF RACK (4x Plank End-Cap KIT -- Slotted)

  Installation Instructions [COMING SOON]

  [PLATFORM ONLY]

  3	ROOF RACK (2x Plank KIT -- 1146MM)
  1	WK2 ROOF RACK (Platform Frame KIT)

  Installation Instructions [COMING SOON]

  [MOUNTING RAILS ONLY]

  1	[MOUNTING RAILS ONLY]

  Installation Instructions [COMING SOON]
  OPTIONS

  FULL ROOF RACK SYSTEM

  The pinnacle of roof rack performance for the WK2. We start with our Mounting Rails, then add (6) Planks and finish with our Platform Frame KIT (providing a smooth outside border that looks great, adds strength and delivers the lowest wind noise possible). This configuration delivers industry leading load ratings (150kg dynamic & 600kg static) along with a nearly unlimited amount of mounting locations for accessories. Best of all, we do it in style with a completely smooth top face, amazing fit-n-finish and fully hidden fasteners.

  SAFARI EDITION

  Our Safari Edition is all about delivering maximum functionality. We start with our Mounting Rails, then add (6) Planks and (12) End-Caps (featuring 7 slots just like the traditional Jeep grille). The modular design allows you to easily remove/reposition the planks to suit the needs of your current adventure. This configuration delivers industry leading load ratings (150kg dynamic & 600kg static) and a nearly unlimited amount of mounting locations for accessories.

  OVERLAND EDITION

  Our Overland Edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (4) Planks, (8) End-Caps (featuring 7 slots just like the traditional Jeep grille), our Roof Top Tent KIT (to make RTT installation super easy) and finish with (4) Tie-Down Plates. The modular design allows you to easily remove/reposition the planks to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional and can accommodate numerous accessories and tie-down strap configurations. This configuration delivers industry leading load ratings (150kg dynamic & 600kg static) and a nearly unlimited amount of mounting locations for accessories.

  ROOF TOP TENT EDITION

  If you're sleeping on the roof, you want to be sure your roof rack can handle the extra weight. Our RTT Edition provides industry leading load ratings (150kg dynamic & 600kg static) in a package that looks great and is super easy to install. We start with our Mounting Rails, we add (2) Planks and (4) End-Caps (featuring 7 slots just like the traditional Jeep grille). Then we add our Roof Top Tent KIT, to make your RTT installation super easy. Best of all, it's extremely easy to modify, upgrade or configure (just like every version of the WK2 Roof Rack).

  BARE BONES EDITION

  We start with our Mounting Rails, then we add (2) Planks and (4) End Caps (featuring 7 slots just like the traditional Jeep grille). Super simple. Super strong (industry leading load ratings - 150kg dynamic & 600kg static). No non-sense. Want to upgrade later to a Safari Edition, RTT Edition or Full Roof Rack System? No Problem. Want to run with a simple setup that looks awesome, and works as advertised. This is it!

  [PLATFORM ONLY]

  Our Full Roof Rack Platform delivers maximum configurability in an extremely thin (28.34mm) and light weight form factor. Designed with hidden fasteners, (2) full length T-Nut slots on each plank and compatibility with our flush mounted Tie-Down Plates. The modular design allows you to easily remove/reposition the planks to suit the needs of your current adventure. This platform delivers the pinnacle of performance for roof rack systems.

  [MOUNTING RAILS ONLY]

  These Mounting Rails are one of the keys to our industry leading load ratings, (150kg dynamic & 600kg static). Not only do they transfer forces to the strongest points on the WK2 roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system' that is significantly stronger than any of our competitors.

  ---

  * WARNING *

  FOR MAXIMUM SAFETY DO NOT EXCEED MANUFACTURERS ROOF WEIGHT LIMITS. Our load ratings represent the maximum mechanical forces our roof rack system can withstand before failure. Our load ratings do not address vehicle safety during high-speed manoeuvres, or changes to vehicle dynamics caused by a higher centre of gravity.
  
  

  * CAUTION *

  For maximum safety, loads should be evenly distributed and properly secured to avoid shifting during transport. Before using your roof rack, it is important to familiarise yourself with the proper load securing techniques and be constantly safety oriented. Please note, all of our load ratings are based on an evenly distributed load.
• UNPRECEDENTED CONFIGURABILITY

  Choose how many planks you want. Position your planks wherever you want. Move your planks easily, whenever you want. Choose if you want a frame around the outside. Choose how many Tie-Down Plates you want, and where you want them located. Configure your rack however you want. Numerous options. Numerous configurations.

  
  

  MODULAR DESIGN

  Our modular engineering approach allow us to deliver a roof rack system that can be easily adapted to any situation. It also means you can upgrade/downgrade your roof rack any time your needs require.

  
  

  HIGH-STRENGTH

  All versions deliver industry leading load ratings (150kg dynamic & 600kg static) that have been independently tested and certified using international safety standards. During independent testing, our roof rack system successfully withstood 330kg of upward force, 600kg of forward force (including a special 20° off-axis test). To achieve our certification we needed to have less than 10mm of movement in our structure at the tested loads, we had 0.17mm!
  
  One of the keys to our industry leading load ratings is our Mounting Rails. Not only do they transfer forces to the strongest points on the WK2 roof, they also utilise a boxed design that resists deformation at any singular point. This unique design element creates a 'mounting system’ that is much stronger than any of our competitors.

  
  

  LOW WEIGHT

  We utilise the latest manufacturing techniques and aircraft-grade aluminium alloys to deliver a roof rack system with an extremely high strength-to-weight ratio. This means our roof rack has an extremely low weight, while still being the very strongest on the market.

  
  

  STEALTH

  Our WK2 Roof Rack is nearly silent. With the sunroof closed you can’t hear it. With the sunroof open it only registers an amazing 0.5DB at drivers ear level. No creaking, no rattling and almost no additional wind noise. We accomplish this amazing feat through a series of technologically advanced aerodynamic methods, along with some proven old school tech, (rubber washers).

  
  

  LOW PROFILE

  Chief Products WK2 Roof Rack sits incredibly low at only 86mm above the roofline. We looked at mounting even closer to the vehicle, but during our real-world testing we found it was nice to have a slight gap between the roof and the rack. That small gap makes it much easier to slip a hand underneath the rack to wash your roof.

  
  

  UNOBSTRUCTED VIEWS

  If your WK2 has a Dual-Pane Panoramic Sunroof, our WK2 Roof Rack won’t block your view, so you can see and experience the beauty of the nature around you.

  
  

  STYLE

  We poured over every design detail to ensure the WK2 Roof Rack would look great from every angle. Function was our primary aim, but we also studied every line and every proportion, paying close attention to how they integrate with the lines of the WK2.

  
  

  FIT & FINISH

  We utilise advanced manufacturing techniques to achieve a degree of fit-and-finish you have to see in-person to truly appreciate.

  
  

  SMOOTH TOP SURFACE

  The top of our platform is completely smooth. No bolt heads sticking up, tie-down plates that sit completely flush and fasteners that are hidden from view.

  
  

  EASILY MOUNT ACCESSORIES

  We make it extremely easy to mount your accessories and bring your gear with you. We provide (2) channels in each plank that allow you to use T-Nuts that slide the entire length of the planks. Even better is our industry leading Tie-Down Plates that provide numerous mounting options and easily slide and clamp between the planks.

  
  

  TIE-DOWNS

  A key usability aspect for our WK2 Roof Rack was that you could easily bolt/fasten/tie-down to the rack at almost any location. Our custom engineered Tie-Down Plates deliver on that goal. They clamp securely between the planks in a way that allows them to easily move and fasten anywhere along the entire length of the planks. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.

  
  

  NEARLY UNLIMITED ACCESSORY MOUNTING LOCATIONS

  We provide heaps of mounting locations so you can easily mount accessories anywhere. To achieve that goal, we allow you to move your planks wherever you need them. Then we provide Planks with two channels for captive T-Nuts, allowing you to bolt/fasten to the Plank at any point along the entire length of the Plank. Finally, for maximum flexibility we provide Tie-Down Plates that can easily move and fasten anywhere along the entire length of the planks.

  
  

  COMPATIBLE WITH MOST ACCESSORIES

  If the accessory uses M8 or M10 bolts for mounting, it will probably work with our roof rack system. If not, one of our upcoming adapter kits will probably take care of business.

  
  

  INNOVATIVE SUITE OF ACCESSORIES

  Chief Products engineering team has already started work on several innovative accessories to further expand the functionality of our roof rack system. Taking advantage of our ground-up approach and modular design is allowing us to develop roof rack accessories that no one has ever seen before.

  
  

  INDUSTRY LEADING CORROSION PROTECTION

  We utilise aircraft-grade aluminium alloys (highly corrosion resistant) for all of the major components of our roof rack system, then we add a layer of UV stable and highly durable powder coat to provide additional protection. For all of our steel parts we utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts, then we add a layer of UV stable powder coat on top for additional protection. All of the included fasteners are protected as well - black zinc plating, zinc flake coatings, black oxide coatings or sometimes we just choose to use stainless steel fasteners. Our aim is to keep your roof rack looking great for many years to come.

  
  

  EASY TO INSTALL

  Easy bolt-on installation with no drilling. In addition, our bracketry is fully adjustable so it adapts to your roof (unlike some of our competitors).

  
  

  TOP QUALITY FINISHING TOUCHES

  We include all the details that matter. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening, (critical to combat loosening from off-roading vibrations). Anti-Seize for bolted joints that are resistant to seizing (important for a product that sits on your roof fully exposed to the elements). A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
  
  We even include a few details you might not appreciate right away. For instance, if you’re installing lights, we provide channels in our mounting rails to run your wiring, (we even provide small holes for your zip ties, so you can hold your wiring up out of sight).
• Bolts to the roof using the existing roof nutserts provided by Jeep, no drilling or cutting required. Removal of the OEM plastic roof rails is required.
  WK2 Roof Rack fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  
  

  * Fits USA & Export models.

  ** Fitment on Summit, High Altitude & SRT models requires WK2 Roof Rack (Black Low Profile OEM Rails - Adapter KIT).
  WK2 Roof Rack is compatible with the following products:

  This list will be updated as we test various products/accessories and our customers report their experiences.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD [COMING SOON]
• Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Rock Rails deliver critical off-road protection for your WK2 with an integrated design that compliments your Jeep’s good looks. We utilise high-strength steel and increased body connections to deliver improved rigidity and better impact force distribution than any of our competitors. The smooth ‘boat bottom’ design protects the body seam underneath the vehicle while ensuring you can easily slide over off-road obstacles. The integrated design replaces the OEM plastic rocker panels to maintain off-road clearance, and the flush mounted bolts ensure everything looks great when you open the doors. The steps have been optimised to keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). To ensure you’ve got the best looking WK2 on the trails, we provide (2) tread plate options that allow you to stylise your WK2 Rock Rails however you choose. Best of all, we spent (8) months performing rigorous real world testing to ensure these are the strongest and most reliable rock rails available for your WK2.

  Our Bare Bones Edition strips back features without sacrificing quality to deliver a no-nonsense version of our WK2 Rock Rails. They still provide industry leading off-road protection, easy installation and a top-notch integrated design, but at a significantly lower price point. They’re perfect for anyone looking for a purpose built protection option for their WK2.

  FEATURES

  Fully Integrated Design

  Smooth 'Boat Bottom' Design

  (2) Tread Plate Options

  (2) Jack Points (Front & Rear underside of each rock rail)

  High-Strength Steel

  E-Coat (Industry Leading Corrosion Resistance)

  Easy Installation (Difficulty = 3/10)

  SPECIFICATIONS

  40.3kg	[NO TREAD] (installed weight)
  43.9kg	TREK ELEVEN (installed weight)
  43.8kg	SAFARI THREE (installed weight)
  29.8kg	BARE BONES EDITION (installed weight)

  INCLUDES

  2	Rock Rails (E-Coat + Textured Black Powder Coating)
  2	Clamping Rails (E-Coat)
  2	Clamping Plates (E-Coat)
  2	Tread Plate, Lower (6061 Aluminium + Silver Akzo Powder Coating)
  2	Tread Plate, Upper (E-Coat + Textured Black Powder Coating)
  4	Rear Mounting Plates (E-Coat)
  12	Chief Products Body Insert Nuts (E-Coat)
  22	M6 x 16mm (8.8) Counter Sunk Head Bolts (Zinc Plated)
  22	M6 x 10mm (8.8) Counter Sunk Head Bolts (Black Zinc Plated)
  8	M6 x 25mm (10.9) Bolts (Zinc Plated)
  12	M10 x 40mm (10.9) Bolts (Zinc Plated)
  12	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  8	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  8	M6 (CL8) Nuts (Zinc Plated)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  TREK ELEVEN (Previous Edition)

  WK2 Rock Rails with the Trek Eleven tread plates. Same product delivered in older packaging.

  TREK ELEVEN (Latest Edition)

  WK2 Rock Rails with the Trek Eleven tread plates. Same product delivered in new packaging, (new box with new printing).

  SAFARI THREE (Previous Edition)

  WK2 Rock Rails with the Safari Three tread plates. Same product delivered in older packaging.

  [NO TREAD] (Previous Edition)

  WK2 Rock Rails with no tread plates. Same product delivered in older packaging.

  [NO TREAD] (Latest Edition)

  WK2 Rock Rails with no tread plates. Same product delivered in new packaging, (new box with new printing).

  BARE BONES EDITION

  WK2 Rock Rails with no tread plates and no step.

  MORE INFO

  EASY TO UPGRADE - You can easily upgrade WK2 Rock Rails [NO TREAD] at any time by adding - WK2 Rock Rails (Tread KIT).
• Off-Road Protection

  Provides off-road protection for the rocker panels and lower doors of your WK2. Our design also provides protection for the body seam and wiring loom that run along the underside of your WK2.

  
  

  High-Strength

  Made from High-Strength Steel with a design that incorporates more body connections than our competitors to improve rigidity and provide significantly better impact force distribution. Through FEA computer modelling and (8) months of real world testing we've delivered high-strength rock rails that you can rely on when you need them most.

  
  

  Great Style

  Our design team paid attention to every line, so we could deliver rock rails that compliment the lines of your WK2 with a fully integrated appearance. Open the doors and you immediately notice the attention-to-detail with our streamlined design and flush mounting bolts. Best of all, we provide (2) tread plate options so you can stylise your WK2 Rock Rails however you choose. The dual layer design of the tread plates utilises a polished lower plate that looks great and provides an instant wow factor.

  
  

  Convenience

  The steps have been optimised to keep obstacles away from the sides of your WK2, while also providing easy entry (or convenient access to your roof rack). Through real-world testing we ensured you could easily step out over the steps without hitting your leg. We even tested our tread plates to ensure small feet (or paws) wouldn't have troubles with the openings in the tread plates.

  
  

  Maintains Off-Road Clearance

  Since our design replaces the OEM plastic rocker panels, (rather than bolting below) it maintains maximum off-road clearance.

  
  

  Jack Points

  We supply (2) jack points (front & rear) on the underside of each rock rail.

  
  

  Smooth 'Boat Bottom' Design

  Our smooth 'Boat Bottom' design ensures that you can easily slide over off-road obstacles. There's nothing to get caught on off-road and all of the mounting bolts are tucked away and protected.

  
  

  Easy To Install

  Many rock rails for the WK2 are very difficult to install. Some can take up to 8 hours, while others require drilling and numerous nutsert installs. As a point of difference, our engineering team has delivered an install process that is extremely easy. We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. Additionally, if you purchase one of our tread plates you'll be happy to know we anodise the polished Aluminium to protect it from oxidation and keep it looking great.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting required. Replaces OEM plastic rocker panels.
  WK2 Rock Rails fit the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Altitude & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, SRT, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, Blackhawk & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, High Altitude & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude,Trailhawk & Trackhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude,Trailhawk & Trackhawk

  
  

  * Fits USA & Export models.

  * The OEM fender flares on SRT, Summit & High Altitude extend further into the wheel wells than other WK2 models. We've chosen not to extend our WK2 Rock Rails to match these flares because it would limit the ability to install larger tyres.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I install the WK2 Rock Rails myself?

  Can I use a Hi-Lift Jack with my WK2 Rock Rails?

  What products are compatible with Summit & High Altitude?

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel and features a specially engineered mounting system that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar, making it extremely easy to mount your accessories. Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.

  FEATURES

  304 Stainless Steel (Excellent Corrosion & Scratch Resistance)

  Bar Assembly = Mirror Polished or Durable Powder Coat Finish

  Mounting Arms = E-Coat + Durable Powder Coat Finish

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  10.6kg	Fully Installed Weight (Including Mounting Hardware)
  63.5mm	Bar Diameter
  629mm	Mounting Tab Total Length (24.76 inches)
  599mm	Mounting Tab Slot Length (23.58 inches)
  123	Brinell Hardness (Excellent Scratch Resistance)
  29.4˚	Approach Angle (lower front fascia removed + standard suspension)
  33.3˚	Approach Angle (lower front fascia removed + air suspension OR2)
  Same As Stock	Approach Angle (lower front fascia installed)

  INCLUDES

  1	Bar Assembly (304 Stainless Steel)
  2	Chassis Mounting Arms
  4	Chassis Mounting Plates
  2	M10 x 60mm Heavy Duty Washers (Black EDP Coating)
  4	M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated)
  4	M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M10 Nuts (Zinc Plated)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  GLOSS BLACK

  304 Stainless Steel with durable gloss black powder coat finish.

  MIRROR POLISHED

  304 Stainless Steel with a high quality mirror polish.

  [MOUNTING ARMS ONLY]

  The mounting arms sold as a separate kit.

  MORE INFO

  *Parking Sensor Compatibility - We provide 95% compatibility (read more).
• Excellent Approach Angle

  Since our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.

  
  

  Parking Sensor Compatibility

  Through careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on all WK2 models.

  
  

  High Strength

  Our innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.

  
  

  Highly Scratch Resistant

  By using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.

  
  

  Low Installed Weight

  Only 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  
  

  Accommodates Numerous Lighting & Accessory Options

  The accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.

  
  

  Contoured To Fit

  The accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.

  
  

  Compatible With Front Recovery Points

  Can be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.

  
  

  Compatible With Adaptive Cruise Control

  Through careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.

  
  

  Guards Against Damage During Recovery

  The mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) on the mounting arms and bracketry to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Mirror Polish That Lasts

  Our mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed.
  WK2 Nudge Bar fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, SRT & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, SRT & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk, SRT & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude, SRT & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, SRT & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, SRT & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, SRT & Trailhawk

  
  

  * Fits USA & Export models.

  ** Fitment on all Summit, High Altitude, SRT & Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia for the mounting brackets. Instructions are not currently provided for this modification.
  Fitment confirmed with the following products:

  WK2 Recovery Point

  WK2 Recovery Hook

  WK2 Sump Protection Plate

  WK2 Lower Front Guard

  WK2 Hidden Winch Mount
  Does NOT fit with the following products:

  OEM Tow Hooks (part# 82212095)

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I install the WK2 Nudge Bar myself?

  Is the WK2 Nudge Bar compatible with the parking sensor system?

  How do you remove the lower front fascia?

  What products are compatible with Summit & High Altitude?

  WK2 Nudge Bar - Revision History

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Hidden Winch Mount provides a high-strength place to mount your winch without ruining your Jeep's good looks. We've engineered a winch mounting system that can remain completely hidden while still being 100% compatible with the all of your Jeep's safety systems, (adaptive cruise control, forward collision warning, parking sensor systems, etc.). It delivers numerous industry leading features - including an engineer certified 10,000lb max rating, E-Coat Corrosion Protection and a very low 12.85kg install weight. By positioning the winch between the chassis structure (lower than our competitors) we're able to provide significantly improved cooling, better off-axis strength, as well as more space for larger winches. Best of all, we spent (12) months performing rigorous real world testing to ensure you can rely on our winch mounting system when you need it most.

  FEATURES

  High-Strength 350 Grade Steel

  E-Coat (Industry Leading Corrosion Protection)

  Durable Powder Coat Finish (Satin Black)

  Drainage Slots

  Easy Installation (Difficulty = 4/10)
  SPECIFICATIONS

  10,000lbs Max Rating [Engineer Certified]

  Fully Installed Weight = 12.85kg (approximate without winch)

  Approach Angle = Same As Stock

  INCLUDES

  1	Winch Cradle
  2	Cradle-Frame Mounts
  2	Chassis Support Brackets
  2	Chassis Mounting Plates
  2	Bonnet Supports
  6	M12 x 35mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M10 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M8 x 100mm (10.9) Bolts (Zinc Plated)
  4	M8 x 25mm (10.9) Bolts (Zinc Plated)
  2	M6 x 25mm (10.9) Bolts (Zinc Plated)
  2	M6 x 216mm (10.9) Bolts (Zinc Plated)
  6	M12 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  8	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  2011-2015 (HYDRAULIC STEER)

  All WK2s before 2016 with hydraulic steering.

  2016+ (ELECTRIC STEER)

  All WK2s after 2015 with electric steering.

  [MOUNTING BRACKETS ONLY]

  Only the Mounting Brackets, no cradle included.

  EXTRAS

  ACC Camera Kit

  Mounting bracket & hardware for WK2s equipped with Adaptive Cruise Control.

  Air Suspension Kit

  Mounting bracket & hardware for WK2s equipped with Quadra-Lift Air Suspension.

  WK2 Lower Front Guard Kit

  Mounting bracket that provides extra strength to the WK2 Lower Front Guard, (recommended, but not required).

  OEM Tow Hooks Kit

  Mounting bracket & hardware for installation of OEM Tow Hooks with WK2 Hidden Winch Mount. Please note, this kit will not allow installation of OEM Tow Hooks with the WK2 Lower Front Guard, (see fitment tab for more information).

  Hawse Winch Fairlead

  Designed with slim lines, large radius edges and a mirror polish finish that fits perfectly on WK2s.
• High-Strength

  Made from 3mm, 5mm, 6mm & 8mm High-Strength 350 Grade Steel. Mounted to the chassis in multiple locations to ensure recovery forces are evenly distributed and don't overload the chassis mounting points. Through FEA computer modelling and 12 months of real world testing we've delivered a high-strength winch mounting system that you can rely on when you need it most.

  
  

  Maintain OEM Appearance

  The WK2 Hidden Winch Mount can be installed behind your bumper and lower front fascia, maintaining the great looks of your Jeep Grand Cherokee. Then if you want to, you can easily remove the lower front fascia when heading off-road.

  
  

  Low Installed Weight

  Only 12.85kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  
  

  Lower Winch Position

  Our lower winch position provides numerous benefits. Ability to install taller winches, better cooling to the radiator, doesn’t interfere with license plate mounting, as well as positioning the winch directly between the frame rails for maximum strength.

  
  

  Maximum Approach Angle

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  
  

  Compatible With Adaptive Cruise Control

  Through careful engineering & testing we've delivered a winch mount that is compatible with the adaptive cruise control system on all WK2 models.

  
  

  Compatible With Parking Sensors

  Through careful engineering & testing we've delivered a winch mount that is compatible with parking sensors on all WK2 models.

  
  

  Compatible With Our Entire Product Line

  Already own our WK2 Lower Front Guard, WK2 Sump Protection Plate, WK2 Recovery Hooks, WK2 Recovery Points or WK2 Nudge Bar? We’ve designed the WK2 Hidden Winch Mount to easily work with all of our products.

  
  

  Compatible With Excellent Front Recovery Options

  Can be installed with OEM Tow Hooks or Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which are engineer rated to 4,500kg [1.5 GVM]).

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting required. Installation of lower front fascia requires cutting a hole for the winch fairlead.
  WK2 Hidden Winch Mount fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  
  

  * Fits USA & Export models.

  ** Fitment on all Summit & High Altitude models requires permanent removal of the lower front fascia. The lower front fascia will not reinstall on the vehicle without modification.
  Fitment unconfirmed on the following vehicles:

  2012-2018 Jeep Grand Cherokee - SRT
  Fitment confirmed with the following products:

  * WK2 Lower Front Guard

  WK2 Sump Protection Plate

  WK2 Nudge Bar

  WK2 Recovery Point

  WK2 Recovery Hook

  Warn Zeon 10-S Platinum

  Smittybilt Gen2 X20 Comp (10,000lb)

  ** OEM Tow Hooks (part# 82212095)

  
  

  * Fitment with Australian versions of the WK2 Lower Front Guard (purchased before March 2017), requires (2) metal tabs be cut/removed from the centre section of the WK2 Lower Front Guard. This modification is not required for USA model WK2 Lower Front Guards or any WK2 Lower Front Guards purchased after March 2017.

  
  

  ** You can install OEM Tow Hooks OR the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. You cannot install OEM Tow Hooks AND the WK2 Lower Front Guard with the WK2 Hidden Winch Mount. For more information read our Support Article, (here).
  Does NOT fit with the following products:

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I install the WK2 Hidden Winch Mount myself?

  Can I install these products together, (WK2 Hidden Winch Mount + WK2 Lower Front Guard + OEM Tow Hooks)? [COMING SOON]

  What winches do you recommend? [COMING SOON]

  Will my winch fit? [COMING SOON]

  Will my winch fairlead fit? [COMING SOON]

  Do I need a wireless winch? [COMING SOON]

  What's the optimum order of installation for multiple products?

  How do you remove the lower front fascia?

  What products are compatible with Summit & High Altitude?

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Sump Protection Plate provides critical off-road protection for the underside of your engine. It's made from High-Strength Steel and features a rolled front lip design that is braced against the frame for maximum strength while still allowing easy removal/attachment of the lower front fascia.

  Our latest release delivers several industry-leading features. Recessed rear mounting bolts that are impossible to hit when driving off-road. Slotted Bolt Head Protectors that protect the front mounting bolts from off-road damage. A Heavy Duty version that is 270% stronger than Standard. An Access Panel version that provides easy servicing of 5.7L engines. A new Bare Bones Edition, that provides a great price while still delivering top-notch quality.

  Best of all, we deliver all of the finishing touches that matter. High tensile zinc plated bolts. Wedge-Lock washers for bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. Detailed install instructions. All packaged to arrive safely and looking great.

  FEATURES

  High-Strength Steel

  Bolt Head Protectors (Protects Bolt Heads)

  Recessed Bolts (Smooth Undercarriage)

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish (Textured Black)

  Drainage Slots

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  10.9kg	Standard (Including Mounting Hardware)
  12.2kg	Access Panel (Including Mounting Hardware)
  17.9kg	Heavy Duty (Including Mounting Hardware)
  10.8kg	Bare Bones Edition (Including Mounting Hardware)

  INCLUDES

  1	Sump Protection Plate
  4	M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  4	M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 20mm (4.6) Bolts (Zinc Plated)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M8 x 32mm Washers (Zinc Plated)
  2	M8 Nyloc Nuts (Zinc Plated)
  4	M8 x 3mm Bushings (Aluminium)
  4	M6 Nutserts (Stainless Steel)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  STANDARD

  A very strong option, perfect for normal off-road use.

  ACCESS PANEL

  Our Standard version with an added access panel for performing oil changes on V8 model WK2s. Includes an additional (4) M6 Chief Products Bolt Head Protectors (Standard) and (4) Wedge-Lock Washers for the access panel.

  HEAVY DUTY

  A heavy duty option for anyone wanting extra protection off-road. Made from 5mm high-strength steel it is 270% stronger than our Standard & Access Panel versions.

  BARE BONES EDITION

  A stripped back version with all the same top-notch quality. Doesn't include Bolt Head Protectors (Slotted). E-Coated in Satin Black, with no powder coat.
• High-Strength

  All versions are made from High-Strength Steel and feature a rolled front lip design that is braced against the frame for maximum strength. For those wanting maximum strength we also offer a Heavy Duty version (270% stronger than our Standard version).

  
  

  Simplified Bushing System

  Our simplified bushing system provides protection from creaking, while simplifying the install process to help reduce installation mistakes by service departments.

  
  

  Compatible With Mopar Skid Plates

  Engineered to integrate perfectly with the Mopar Front Axle Skid Plate. Whether your WK2 came from Jeep with the Off-Road Adventure Pack II or you decided to add the Mopar skid plates afterward, our WK2 Sump Protection Plate is designed to integrate perfectly and provide a smooth undercarriage.

  
  

  Compatible With Our Entire Product Line

  Already own our WK2 Lower Front Guard, WK2 Recovery Hooks, WK2 Recovery Points, WK2 Nudge Bar, WK2 Transmission Protection Plate or WK2 Hidden Winch Mount? We’ve designed the WK2 Sump Protection Plate to integrate perfectly with all of our products.

  
  

  Ease Of Use

  We’re the only company in the world that provides an Access Panel version, designed to make it extremely easy to service your V8 WK2.

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Bolt Head Protection

  Our Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting required. Replaces OEM/Mopar plastic 'Belly Pan, Front' (part# 68037063 - 68091772 - 55079191).
  WK2 Sump Protection Plate fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Altitude & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, Blackhawk & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, High Altitude & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude & Trailhawk

  
  

  * Fits USA & Export models.
  Fitment confirmed with the following products:

  WK2 Lower Front Guard

  WK2 Hidden Winch Mount

  WK2 Nudge Bar

  WK2 Recovery Point

  WK2 Recovery Hook

  WK2 Transmission Protection Plate

  Mopar 'Front Axle Skid Plate' (part# 82211995 & 82213094)

  ARB Bull Bar (read more)

  ECB Bull Bar

  Uneek Bull Bar

  Ironman Bull Bar

  Rocky Road Outfitters Bumper/Brush Bar/Winch Mount Combo

  Rocky Road Outfitters Pre-Runner

  TJM Bull Bar (read more)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD

  DOWNLOAD (Previous Version - REV3)
• Does my Jeep Grand Cherokee need a Sump Protection Plate?

  Which option is right for my needs - Standard (3mm) or Heavy Duty (5mm)?

  Are the M6 mounting bolts strong enough?

  What products are compatible with Summit & High Altitude?

  WK2 Sump Protection Plate - Revision History

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Transmission Protection Plate provides off-road protection for the critical underside of your transmission. It's made from High-Strength Steel with reinforced boxed edges to provide maximum impact protection. It's designed to be installed on its own or integrate with the Mopar set of skid plates - providing a fully protected and streamlined undercarriage.

  The latest version delivers several enhancements. A new mounting system with recessed mounting bolts that are impossible to hit when driving off-road. Less parts for easier installation. Industry leading E-Coat corrosion protection. Optimised slots for increased airflow and drainage. Best of all, we’ve delivered an impressive 40% strength improvement.

  FEATURES

  High-Strength 350 Grade Steel

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish (Textured Black)

  Drainage Slots

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  6.7kg

  Installed Weight (Including Mounting Hardware)

  INCLUDES

  1	Transmission Protection Plate
  3	M8 x 30mm High Tensile (8.8) Bolt (Zinc Plated)
  3	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	M8 x 3mm Bushings (6061 Aluminium)
  1	M8 Flanged (CL8) Nut (Zinc Plated)
  1	4g pouch Anti-Seize
  Installation Instructions

• High Strength

  Made from High-Strength 350 Grade Steel with boxed edges for maximum impact strength.

  
  

  Compatible With Mopar Skid Plates

  Engineered to integrate perfectly with the Mopar Front Axle Skid Plate and Mopar Transfer Case Skid Plates. Whether your WK2 came from Jeep with the Off-Road Adventure Pack II or you decided to add the Mopar skid plates afterward, our WK2 Transmission Protection Plate is designed to integrate perfectly and provide a smooth and fully protected undercarriage.

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Recessed Mounting Bolts

  All mounting bolts are recessed to keep critical bolt heads protected from off-road obstacles.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed. Replaces OEM/Mopar plastic 'Belly Pan, Transmission' (part# 05182517).
  WK2 Transmission Protection Plate fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Altitude & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, Blackhawk & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, High Altitude & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, SRT, Summit, Altitude, High Altitude & Trailhawk

  
  

  * Fits USA & Export models.
  Fitment unconfirmed on the following vehicles:

  2018-2019 Jeep Grand Cherokee - Trackhawk
  Fitment confirmed with the following products:

  Mopar 'Front Axle Skid Plate' (part# 82211995 & 82213094)

  Mopar 'Transfer Case Skid Plate' (part# 82211994)

  Dom's DEF Protection Plate for diesel WK2s
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• What products are compatible with Summit & High Altitude?

  WK2 Transmission Protection Plate - Revision History

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Lower Front Guard is engineered to protect the critical components at the lower front of your WK2 without ruining your Jeep's good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. It features a centre section made from 5mm high-strength steel for unparalleled strength, while still providing critical airflow to the lower radiator core. Bolted directly to the sub-frame it provides the very best approach angle possible, and our Slotted Bolt Head Protectors protect the front mounting bolts from off-road damage. Best of all, we've designed the WK2 Lower Front Guard so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.

  We've created a modular system of protection products for the WK2, this means our WK2 Lower Front Guard will integrate perfectly with all of our other products - WK2 Hidden Winch Mount, WK2 Sump Protection Plate, WK2 Nudge Bar, WK2 Recovery Hook and WK2 Recovery Point.

  FEATURES

  High-Strength Steel

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish (Textured Black)

  Drainage Slots

  Airflow Slots

  Easy Installation (Difficulty = 4/10)
  SPECIFICATIONS

  Standard Guard = 14.90kg (Including Mounting Hardware)

  ACC Guard = 15.20kg (Including Mounting Hardware)

  Approach Angle = Same As Stock
  INCLUDES

  1	Centre Section (5mm High-Strength Steel)
  2	Chassis Mounting Brackets
  2	Corner Mounting Brackets
  2	Corner Guards
  1	Standard Guard or ACC Guard
  1	Air Dam Reinforcement Bracket
  4	M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  2	M8 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083)
  4	M10 x 20mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated)
  14	M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated)
  4	M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  18	M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M8 x 8mm Bushings (6061 Aluminium)
  4	M6 Nutserts (Stainless Steel)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  Standard Guard

  For WK2s without ACC (Adaptive Cruise Control).

  ACC Guard

  For WK2s with ACC (Adaptive Cruise Control).

  [NO CENTRE GUARD]

  Base unit with no Centre Guard.
• Off-Road Protection

  Off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via high-strength 350 grade steel that is 5mm thick on the main centre section.

  
  

  Maintain OEM Appearance

  The lower front fascia can be easily installed over the WK2 Lower Front Guard, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you're heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 Lower Front Guard.

  
  

  Low Installed Weight

  Only 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).

  
  

  Maximum Approach Angle

  Since our design doesn't extend past the front of your WK2, the maximum approach angle is retained.

  
  

  Compatible With Excellent Front Recovery Options

  Can be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg [1.5 GVM]).

  
  

  Easily & Inexpensively Repaired

  Because we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.

  
  

  Low Cost

  Significantly less expensive than a Bull Bar, especially when you include shipping and installation costs.

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can install this yourself.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Bolt Head Protection

  Our Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed.
  WK2 Lower Front Guard fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited, Overland & SRT

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude  & SRT

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, Trailhawk  & SRT

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk  & SRT

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk, High Altitude  & SRT

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude, 75th Anniversary Edition  & SRT

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Trailhawk  & SRT

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, Trailhawk  & SRT

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, Trailhawk  & SRT

  
  

  * Fits USA & Export models.

  ** Fitment on all Summit & High Altitude models requires permanent removal of the lower front fascia.

  *** Fitment on all SRT models required cutting of the lower front fascia.
  Fitment unconfirmed on the following vehicles:

  2012-2019 Jeep Grand Cherokee - SRT
  Fitment confirmed with the following products:

  WK2 Sump Protection Plate

  WK2 Hidden Winch Mount

  WK2 Nudge Bar

  WK2 Recovery Point

  WK2 Recovery Hook

  Uneek WK2 Grand Cherokee Bash Plate

  Rocky Road Bumper Kits & Winch Mounting Kits (2011 - 2018 WK2s)

  OEM Tow Hooks (part# 82212095)
  Does NOT fit with the following products:

  Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)

  Jeep Belly Pan (part# 68089029AC)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Does my Jeep Grand Cherokee need a WK2 Lower Front Guard? [COMING SOON]

  How do I determine which version I need? [COMING SOON]

  Can I drive with the OEM lower plastic fascia removed? [COMING SOON]

  Do I need new front springs to accommodate the additional weight? [COMING SOON]

  Can I install the WK2 Lower Front Guard myself?

  How does the WK2 Lower Front Guard compare to a Bull Bar?

  How do you remove the lower front fascia?

  What products are compatible with Summit & High Altitude?

  WK2 Lower Front Guard - Revision History [COMING SOON]

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Rear Bumper Guard is engineered to provide protection for the rear of your WK2 without ruining your Jeep's good looks. The clean simple design hugs the lines of the rear bumper to provide protection while remaining unobtrusive. It's made from high strength 3mm, 4mm, 5mm & 8mm steel with boxed sections to provide maximum strength. Best of all, through careful engineering and testing we've created a rear protection system that looks great and is 100% compatible with Jeep/Mopar towbars.

  FEATURES

  High-Strength Steel

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish (Textured Black)

  Drainage Slots

  Recessed Mounting Bolts

  Easy Installation (Difficulty = 3/10)
  SPECIFICATIONS

  17.25kg	Open Centre Guard (Including Mounting Hardware)
  18.85kg	Full Centre Guard (Including Mounting Hardware)
  24.8˚	Departure Angle (Standard Suspension)
  26.5˚	Departure Angle (Air Suspension OR2)

  INCLUDES

  1	Centre Guard (Open or Full)
  2	Chassis Mounting Brackets
  4	M12 x 30mm High Tensile (10.9) Bolts (Zinc Plated)
  4	M12 Wedge-Lock Extended Washers (Zinc Flake Coating)
  4	M16 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize
  Installation Instructions

  OPTIONS

  OPEN CENTRE GUARD (Latest Edition)

  For WK2s with a Mopar towbar that sits below the bumper, (Australian, European and some other international WK2s). The latest revision has been updated for easier installation and lower installed weight.

  OPEN CENTRE GUARD (Previous Edition)

  For WK2s with a Mopar towbar that sits below the bumper, (Australian, European and some other international WK2s).

  FULL CENTRE GUARD

  For WK2s with a Mopar towbar that is integrated into the bumper (USA, etc.). For WK2s without a towbar.

  ---

  * RECOMMENDED *

  For maximum protection we recommend combining the WK2 Rear Bumper Guard with the WK2 Rear Bumper Guard (Corner Protection Kit). The (2) products integrate seamlessly to provide robust protection for the rear of your WK2.
  
  

  * ATTENTION *

  This product does not fit 3.0L diesel models with a DEF Tank (USA 3.0L Models).
• High Strength Off-Road Protection

  Engineered and fully tested to provide off-road protection for the rear of your WK2. Accomplished via high-strength 3mm, 5mm & 8mm steel with boxed sections to provide maximum strength.

  
  

  Contoured To Fit

  We designed the WK2 Rear Bumper Guard to hug the lines of the rear bumper, so it provides off-road protection while remaining unobtrusive.

  
  

  Perfect Integration

  Engineered to integrate seamlessly with the WK2 Rear Bumper Guard (Corner Protection Kit) and provide robust off-road protection for the rear of your WK2.

  
  

  Compatible With Rear Parking Sensors

  Unlike bulky off-road rear bumpers, the WK2 Rear Bumper Guard is fully compatible with the rear parking sensors and requires no alteration to the rear parking sensor system.

  
  

  Compatible With Jeep/Mopar Towbars

  Designed to integrate seamlessly with Jeep/Mopar Towbars (USA & Australian models).

  
  

  Recessed Mounting Bolts

  Engineered to keep bolt heads protected off-road.

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed.
  WK2 Rear Bumper Guard fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited, Overland & Summit

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Summit

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, Summit & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Blackhawk

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk
  Does NOT fit on the following vehicles:

  2012-2019 Jeep Grand Cherokee - 3.0L Diesel with DEF Tank (USA 3.0L Models)

  2014-2019 Jeep Grand Cherokee - Summit

  2015, 2016, 2018 & 2019 Jeep Grand Cherokee - High Altitude

  2012-2019 Jeep Grand Cherokee - SRT
  Fitment confirmed with the following products:

  Mopar Towbar - USA (part# 82212180AC)

  Mopar Towbar - Australia (part# AUS2014WKTB)
  Does NOT fit with the following products:

  Hayman Reece Towbar

  Long Range Automotive Auxiliary Fuel Tank (part# JGCHWKDAMY14 & JGCHWKPAMY14)
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Does my Jeep Grand Cherokee need a WK2 Rear Bumper Guard? [COMING SOON]

  Can I install the WK2 Rear Bumper Guard myself? [COMING SOON]

  How do you remove the rear bumper? [COMING SOON]

  What products are compatible with Summit & High Altitude?

  Forged In Australia? [COMING SOON]

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Rear Tie-Downs deliver improved strength and usability, while maintaining a fully integrated appearance. Utilising (4) upgraded tie-down points and a strengthening bracket that hides beneath the trim, we’ve delivered a tie-down system that is (5) times stronger than stock. The new mirror polished tie-down points fit into the stock locations. This ensures ease-of-use and an integrated appearance, but it also ensures there is nothing sticking-up to catch on cargo. Best of all, we spent (8) months performing rigorous real world testing to ensure this is a product you can rely on when you need it most.

  FEATURES

  (4) Reinforced Tie-Down Points

  Integrated Design

  Tie-Down Points = Mirror Polished (6061 Aluminium)

  Strengthening Bracket = E-Coat (Industry Leading Corrosion Protection)

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  5x Stronger Than Stock [Engineer Certified]

  Fully Installed Weight = 1.68kg
  INCLUDES

  4	Tie-Down Points (Mirror Polished 6061 Aluminium)
  1	Strengthening Bracket
  2	M6 x 20mm (12.9) Cap Screws (Zinc Plated)
  2	M6 x 30mm (12.9) Cap Screws (Zinc Plated)
  4	M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	M6 (CL8) Flange Nuts (Zinc Plated)
  1	4g pouch Anti-Seize
  Installation Instructions

• High-Strength

  Utilising (4) upgraded tie-down points and a strengthening bracket that hides beneath the trim, we’ve delivered a tie-down system that is (5) times stronger than stock. In fact, the (2) rear most tie-down points are easily 10 times stronger than stock. Through FEA computer modelling and (6) months of real world testing we've delivered a tie-down system that you can rely on when you need it most.

  
  

  Integrated Design

  Our upgraded tie-down points fit into the stock locations. This ensures ease-of-use and an integrated appearance, but it also ensures there is nothing sticking-up to catch on cargo.

  
  

  Top Quality Appearance

  Each tie-down point is machined from 6061 Aluminium and then mirror polished to look great in the back of your WK2.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points. Minimal cutting required on unseen parts.
  WK2 Hidden Winch Mount fits the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited, Overland & SRT

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland, ALtitude & SRT

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude, Trailhawk & SRT

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, BLackhawk & SRT

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk, High Altitude & SRT

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude, 75th Anniversary Edition & SRT

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Trailhawk & SRT

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, Trailhawk & SRT

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude, Trailhawk & SRT

  
  

  * Fits USA & Export models.
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Can I install the WK2 Rear Tie-Downs myself? [COMING SOON]

  Forged In Australia? [COMING SOON]

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Recovery Point is the strongest recovery attachment point available for your WK2. It features a large 55mm eyelet design that is extremely easy-to-use, and the closed loop design provides the safety benefits of a 'Closed Recovery System'. Our 5mm radius edges (ADR requirement) are a key feature that won't cause damage to soft shackle recovery gear. We provide Heavy-Duty Mounting Plates, Wedge-Lock Washers and High-Tensile Corrosion Resistant Fasteners - making this a product you can trust when you need it most.

  FEATURES

  High-Strength Steel (20mm)

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  4,500kg	SINGULAR - WORKING LOAD LIMIT [Engineer Certified]
  8,000kg	PAIR - WORKING LOAD LIMIT (using bridle strap) [Engineer Certified]
  4.58kg	SINGULAR (fully installed weight)
  9.16kg	PAIR (fully installed weight)
  55mm EYELET

  INCLUDES

  TEXTURED BLACK (SINGULAR)

  1	Recovery Point
  2	Mounting Plates (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize

  INSTALLATION INSTRUCTIONS

  TEXTURED BLACK (PAIR)

  2	Recovery Points
  4	Mounting Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize

  INSTALLATION INSTRUCTIONS

  FLAME RED (SINGULAR)

  1	Recovery Point
  2	Mounting Plates (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize

  INSTALLATION INSTRUCTIONS

  FLAME RED (PAIR)

  2	Recovery Points
  4	Mounting Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize

  INSTALLATION INSTRUCTIONS
  OPTIONS

  TEXTURED BLACK (SINGULAR)

  Provides (1) WK2 Recovery Point that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  TEXTURED BLACK (PAIR)

  Provides (2) WK2 Recovery Points that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  FLAME RED (SINGULAR)

  Provides (1) WK2 Recovery Point that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlght.

  FLAME RED (PAIR)

  Provides (2) WK2 Recovery Points that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlght.

  ---

  * WARNING *

  DO NOT EXCEED THE WORKING LOAD LIMIT OF THIS PRODUCT AT ANY TIME. The Working Load Limit of this product is significantly less for non-straight line pull forces.
  
  

  * CAUTION *

  Every recovery situation has the potential for personal injury. In order to minimise that risk, it is important to familiarise yourself with the proper operation of your recovery equipment before using it, and be constantly safety oriented.
• High Strength

  Engineer rated to 4,500kg WLL, which is 1.5 times the GVM of the WK2. Based on our research, 1.5 times GVM is considered the engineering standard for recovery points. A 3,000kg GVM vehicle stuck in deep mud/sand needs a high-strength recovery point to safely withstand the forces encountered during recovery. The engineer rating jumps to 8,000kg when used as a pair with a bridle strap.

  
  

  Winch Compatibility

  If you're installing a winch (or plan to be recovered by one) you'll want a recovery attachment point that is up to the task. For a 10,000lb winch you'll want a recovery attachment point rated to 4,500kg.

  
  

  Safety

  In addition to the engineer rated design, our point also features a 5mm radius on all exposed edges, (as required by Australian Design Rules as well as various European Pedestrian Safety Standards). The closed loop design ensures recovery gear won't fall off during recovery. Further, while our point protrudes through the opening in the lower fascia for easy attachment of recovery gear, it doesn't extend beyond the front most part of the bumper.

  
  

  Ease Of Use

  The recovery point protrudes just far enough through the opening in the lower fascia to make attachment of recovery gear easy. The closed loop design ensures recovery gear won't fall off during recovery.

  
  

  Compatibility

  Engineered to work with all of our products. Can be easily installed on either side of the vehicle (Drivers or Passengers).

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they're reversible, to make things as easy as possible.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Colour

  Available in several colours, so you can choose which looks best on your machine.

  
  

  Attention To Detail

  Machined edges, smooth surfaces and precision alignment.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed.
  WK2 Recovery Point fits DRIVER & PASSENGER sides of the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  
  

  * Fits USA & Export models.

  ** Fitment on all Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia. These models no longer provide holes for access to the hooks.

  *** Fitment on all Summit & High Altitude models requires cutting (2) holes in the grille area of the lower front fascia. Instructions are not currently provided for this modification.
  Fitment unconfirmed on the following vehicles:

  2012-2019 Jeep Grand Cherokee - SRT
  Fitment confirmed with the following products:

  WK2 Sump Protection Plate

  WK2 Lower Front Guard

  WK2 Hidden Winch Mount

  WK2 Nudge Bar
  WK2 Recovery Point does NOT fit with the following products:

  ARB Bull Bar

  ECB Bull Bar

  Uneek Bull Bar

  Ironman Bull Bar

  Rocky Road Outfitters Prerunner

  Rocky Road Outfitters Bumper/Brush Bar/Winch Mount Combo
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Do I need 1 or 2 recovery attachment points?

  Which is right for my needs - WK2 Recovery Point or WK2 Recovery Hook?

  WK2 Recovery Point - Strength Ratings Explained

  What products are compatible with Summit & High Altitude?

  WK2 Recovery Point - Revision History

  Forged In Australia?

  What Warranty Do You Provide?

• OVERVIEW
• BENEFITS
• FITMENT
• FAQs

• Chief Products WK2 Recovery Hook is the strongest and easiest-to-use recovery attachment point available for your WK2. The open hook design allows quick attachment and recovery, while still being engineer certified to 4,500kg WLL, (8,000kg WLL when using pair with a bridle strap). The 5mm radius edges (ADR requirement) are a key feature that won't cause damage to soft shackle recovery gear. We provide Heavy-Duty Mounting Plates, Wedge-Lock Washers and High-Tensile Corrosion Resistant Fasteners - making this a product you can trust when you need it most.

  FEATURES

  High-Strength 700 Grade Steel (25mm)

  E-Coat (Industry Leading Corrosion Resistance)

  Durable Powder Coat Finish

  Easy Installation (Difficulty = 2/10)
  SPECIFICATIONS

  4,500kg	SINGULAR - WORKING LOAD LIMIT [Engineer Certified]
  8,000kg	PAIR - WORKING LOAD LIMIT (using bridle strap) [Engineer Certified]
  4.70kg	SINGULAR (fully installed weight)
  9.40kg	PAIR (fully installed weight)
  OPEN HOOK

  INCLUDES

  TEXTURED BLACK (SINGULAR)

  1	Recovery Hook
  2	Mounting Plates (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize

  INSTALLATION INSTRUCTIONS

  TEXTURED BLACK (PAIR)

  2	Recovery Hooks
  4	Mounting Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize

  INSTALLATION INSTRUCTIONS

  FLAME RED (SINGULAR)

  1	Recovery Hook
  2	Mounting Plates (Aluminium 5083)
  2	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  1	M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated)
  4	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  1	4g pouch Anti-Seize

  INSTALLATION INSTRUCTIONS

  FLAME RED (PAIR)

  2	Recovery Hooks
  4	Mounting Plates (Aluminium 5083)
  4	M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated)
  2	M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated)
  8	M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
  2	4g pouches Anti-Seize

  INSTALLATION INSTRUCTIONS
  OPTIONS

  TEXTURED BLACK (SINGULAR)

  Provides (1) WK2 Recovery Hook that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  TEXTURED BLACK (PAIR)

  Provides (2) WK2 Recovery Hooks that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Textured Black Powder Powder Coating provides a rugged coating that is excellent at hiding scratches.

  FLAME RED (SINGULAR)

  Provides (1) WK2 Recovery Hook that is reversible and can be installed on either side of the vehicle (Driver or Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlght.

  FLAME RED (PAIR)

  Provides (2) WK2 Recovery Hooks that can be installed as a pair on both sides of the vehicle (Driver and Passenger). The Flame Red Powder Powder Coating provides a rugged coating that looks great and grabs attention as a vehicle highlght.

  ---

  * WARNING *

  DO NOT EXCEED THE WORKING LOAD LIMIT OF THIS PRODUCT AT ANY TIME. The Working Load Limit of this product is significantly less for non-straight line pull forces.
  
  

  * CAUTION *

  Every recovery situation has the potential for personal injury. In order to minimise that risk, it is important to familiarise yourself with the proper operation of your recovery equipment before using it, and be constantly safety oriented.
• High Strength

  Engineer rated to 4,500kg WLL, which is 1.5 times the GVM of the WK2. Based on our research, 1.5 times GVM is considered the engineering standard for recovery points. A 3,000kg GVM vehicle stuck in deep mud/sand needs a high-strength recovery point to safely withstand the forces encountered during recovery. The engineer rating jumps to 8,000kg when used as a pair with a bridle strap.

  
  

  Winch Compatibility

  If you're installing a winch (or plan to be recovered by one) you'll want a recovery attachment point that is up to the task. For a 10,000lb winch you'll want a recovery attachment point rated to 4,500kg.

  
  

  Safety

  In addition to the engineer rated design, our hook also features a 5mm radius on all exposed edges, (as required by Australian Design Rules as well as various European Pedestrian Safety Standards). Further, while our hook protrudes through the opening in the lower fascia for easy attachment of recovery gear, it doesn't extend beyond the front most part of the bumper.

  
  

  Ease Of Use

  The recovery hook protrudes just far enough through the opening in the lower fascia to make attachment of recovery gear easy. The open ended hook makes it quick and easy to attach recovery gear, (especially important when you need to be recovered quickly).

  
  

  Compatibility

  Engineered to work with all of our products. Can be easily installed on both sides of the vehicle (Drivers or Passengers).

  
  

  Easy To Install

  We provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they're reversible, to make things as easy as possible.

  
  

  Industry Leading Corrosion Protection

  We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.

  
  

  Colour

  Available in several colours, so you can choose which looks best on your machine.

  
  

  Attention To Detail

  Machined edges, smooth surfaces and precision alignment.

  
  

  Real World Testing

  There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.

  
  

  Top Quality Finishing Touches

  We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.
• Bolts into existing mounting points in the frame, no drilling or cutting needed.
  WK2 Recovery Hook fits DRIVER & PASSENGER sides of the following vehicles:

  2011 Jeep Grand Cherokee - Laredo, Limited & Overland

  2012 Jeep Grand Cherokee - Laredo, Limited, Overland & Altitude

  2013 Jeep Grand Cherokee - Laredo, Limited, Overland, Altitude & Trailhawk

  2014 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Blackhawk

  2015 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, Blackhawk & High Altitude

  2016 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, High Altitude & 75th Anniversary Edition

  2017 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude & Trailhawk

  2018 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  2019 Jeep Grand Cherokee - Laredo, Limited, Overland, Summit, Altitude, High Altitude & Trailhawk

  
  

  * Fits USA & Export models.

  ** Fitment on all Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia. These models no longer provide holes for access to the hooks.

  *** Fitment on all Summit & High Altitude models requires cutting (2) holes in the grille area of the lower front fascia. Instructions are not currently provided for this modification.
  Fitment unconfirmed on the following vehicles:

  2012-2019 Jeep Grand Cherokee - SRT
  Fitment confirmed with the following products:

  WK2 Sump Protection Plate

  WK2 Lower Front Guard

  WK2 Hidden Winch Mount

  WK2 Nudge Bar
  WK2 Recovery Hook does NOT fit with the following products:

  ARB Bull Bar

  ECB Bull Bar

  Uneek Bull Bar

  Ironman Bull Bar

  Rocky Road Outfitters Prerunner

  Rocky Road Outfitters Bumper/Brush Bar/Winch Mount Combo
  INSTALLATION INSTRUCTIONS

  DOWNLOAD
• Do I need 1 or 2 recovery attachment points?

  Which is right for my needs - WK2 Recovery Hook or WK2 Recovery Point?

  WK2 Recovery Hook - Strength Ratings Explained

  What products are compatible with Summit & High Altitude?

  WK2 Recovery Hook - Revision History

  Forged In Australia?

  What Warranty Do You Provide?

Chief Products Hawse Winch Fairlead is designed with slim lines and a mirror polish finish that fits perfectly on the WK2. Machined from a solid block of aluminium and then polished - it is light, durable, and with large radius edges on both sides it is perfect for synthetic ropes.

Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.